Bland Altman plots


    Sponsored Links


  • 1. Custom made default scatter plot only works for one session
    When I create a custom scatter plot and make it my default chart it works as long as I keep excel open. If I close excel, re-open it and try to use my default plot again the plot displays with all the information squeezed up against the upper edge of the chart window.
  • 2. Autoscaling in Excel 2003
    I have charts I originally developed in Excel 2000. Recently we were upgraded to 2003 and now the autoscaling is inconsistent or doesn't work properly. For example, I have a geography with a data series that has a minimum of 320,00 and a maximum of 400,000 on the Y axis. Using autoscaling in the chart developed with the 2000 application, it will not autoscale...the Y axis begins at 0. But if I use that same data and create a new chart with 2003, it autoscales correctly, but it is still inconsistent with other geographies. Is this a conversion issue going from Excel 2000 to 2003? If it is, is there an easy fix without having to recreate everything? I should mention that prior to the 2003 upgrade, autoscaling worked properly for all my charts.
  • 3. What is the relationship between .ChartArea and the default printer ?
    Hello, I am currently programming some automated charting for an application. In my program I modify the size of the charting area (the goal is to obtain a plot area -inside- that fits exactly some pre-defined dimensions). In order to observe what's going on when I modify some properties, I use the following code: Sub PrintSizes(strMessage As String) MsgBox strMessage & vbCrLf & _ ".ChartArea.Width = " & ActiveChart.ChartArea.Width & vbCrLf & _ ".ChartArea.Height = " & ActiveChart.ChartArea.Height & vbCrLf & _ ".PlotArea.Width = " & ActiveChart.PlotArea.Width & vbCrLf & _ ".PlotArea.Height = " & ActiveChart.PlotArea.Height & vbCrLf & _ ".PlotArea.InsideWidth = " & ActiveChart.PlotArea.InsideWidth & vbCrLf & _ ".PlotArea.InsideHeight = " & ActiveChart.PlotArea.InsideHeight End Sub I noticed that the .ChartArea properties do not react the same way if my default printer is a HP or a Xerox. I could not find an article describing how does the default printer govern those parameters. Does any know where to find such information ? Thank you for your help, Xavier
  • 4. Pivot Chart which shows average line with below and above figures
    Hi .. i 've following data in pivot tables . executive name % achievement ABC 70 XYZ 20 PQR 55 I would like to make pivot chart which shows first average (horizontal line ) at 48 % and below it shows XYZ ( 20%) ...And above average line it shows... two names of ABC ( 70%) AND PQR ( 55%) . -- Env shah

Bland Altman plots

Postby SlJE » Sun, 19 Aug 2007 23:30:02 GMT

Does anyone know if there is an add in that creates Bland Altman plots?



Re: Bland Altman plots

Postby James Silverton » Mon, 20 Aug 2007 00:09:45 GMT

 JRD  wrote  on Sat, 18 Aug 2007 07:30:02 -0700:

 J> Thanks

It does not seem that it would be too difficult to set up Excel 
to do what you want. See the Wikipedia stub on Bland Altman. 
That's just what I did since I had not realized that Bland and 
Altman had arrogated the standard Tukey mean-difference plot, as 
is it is still known as in other fields.

James Silverton
Potomac, Maryland

E-mail, with obvious alterations: 

Re: Bland Altman plots

Postby Gaj Vidmar » Tue, 21 Aug 2007 19:43:50 GMT

I didn't follow the previous discussion, but here's a ready-made macro
solution (from 2004):


For several other Excel solutions for statistics, related info and links,
visit our website at


and follow the link on the left to Software (and scroll down to Excel

Gaj Vidmar, PhD
Univ. of Ljubljana, Fac. of Medicine, Inst. of Biomedical Informatics

Similar Threads:

1.Bland Rows

My spreadsheet has 250 rows and A thru AG in columns, all cells are bordered. 
 All of the columns are used if a row is used.  My sheet has 15% more rows 
than our highest use this year so that I am sure our office does not run 
short of rows (my workbook has 12 of these sheets because we track the info 
monthly and forward the sheets as filled out to other personel). 

My question is how do I print the sheets (only one month is printed at a 
time) to print only the rows that has been filled out, all of the sheet rows 
are continuous, we have no unused rows except for the ones left at the bottom 
that are unused.  when ever I print the sheets it always prints a few extra 
pages from the bottom that are just the gridding.  I don't want to have to 
delete all of the unused row before I print the sheet. 

2.Eliminating bland from Data Validation list?


I looked around other postings but could not find the answer -- what I'm 
having a problem with is thta in my data validation list, I have a range set 
(which refers to column H) -- the number within the range can change, and I 
sort it every time it does change so that there are no spaces between values. 

The problem is that there are numerous blanks in the list at bottom, after 
the last actual value in the range.  Is there any way to get rid of those 
blanks?  I tried deleting (delete shift up) all blank cells after the last 
value and through the last cell (H65536), but this doesn't help.  Below is my 
code.  Thanks!

    With .Range("B2").Validation
        .Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _
            xlBetween, Formula1:="=dvrange"
        .IgnoreBlank = True
        .InCellDropdown = True
        .InputTitle = ""
        .ErrorTitle = "Please select value"
        .InputMessage = ""
        .ErrorMessage = "Please select a value from the drop down menu."
        .ShowInput = True
        .ShowError = True
    End With


3.plots sent to to a chart tab do not show plot & I loss the plot

I have a spreadsheet that has a chart tab with a plot of data from another 
part of the spreadsheet. Now, however, the chart is empty and when I try to 
send any plot to a chart tab the plot is lost and the chart tab is empty.  
This is happening now in all my spreadsheets the plot can be created within a 
spreadsheet but as soon as I move it to a tab the plot is lost and the chart 
tab has nothing in it.  !!!????!!!!

4.Removing Plot lines between plot points on a line chart

A 2003 file being opened in 2007. Contains a line graph. I wish to remove a 
plot line between two points. The lines right now or dotted, when I go 
through the process of entering into the chart options and click on "No plot 
line" nothing happens and the dotted lines remain. ANy suggestions? Or is 
this a converting issue going from 2003 to 2007?

5.plotting long plots

I have a HP designjet 110 nr plotter. I've created a plot that we nee
to show drilling activity. My first plot was 24"x36". Plot works grea
and to scale. My next plot was to be 24"x72". Now the charts will no
even display in Print Preview. I can scale back the plot where it i
about 48" and it will preview and plot, but I need it to go out eve
futher than 72 inches. I may go out as far as 30 feet.

I have images on the plot area and it will print it just fine at th
farther distances

6. Plotting X axis as the log in a semilog plot

7. Excel gives me line plots - I want scatter plots

8. Scatter plot changes to line plot with data gaps

Return to MS EXCEL


Who is online

Users browsing this forum: No registered users and 72 guest