Outlook 2002 Send and Receive Operation Failed

MS OFFICE OUTLOOK

    Sponsored Links

    Next

  • 1. PST2GB shrinks PST drastically!!
    I have a user that has a 1.9 GB PST. I ran scanPST, no luck. Then ran the PST2GB and shrunk it to 1.7 GB, then ran scanPST. That worked fine. However, when I go into Outlook and compact the PST, it goes from 1.7 GB to about 550 MB!! I don't understand why this is happenening or how to resolve this. Any help would be appreciated. -Robert
  • 2. Reading posted messages
    Why, when opening some posted messages, in order to read them you have to scroll horizontally forever when others fit nicely into the confines of the message window?
  • 3. outlook express and activesync??
    I have outlook express 6 and activesync. for my handheld. my handheld is saying (when I sync) no contacts installed and not calendar installed, both of which are true. how do I install these? they dont seem to be anywhere? i have addresses, but this is not contacts (really!!!). its probably dead obvious, but thanks for reading. viv
  • 4. Wrong reply address being sent on internet email
    We are using Office 2000 SP-3, Exchange Server 2000 and Microsoft 2000 Server, Individual machines are using Microsoft 2000 - When I send an email over the internet it shows the internal email address so a person cannot reply to the email, and in some cases such as with Comcast.net the email is immediately kicked back with an "invalid sender" note on it I found some sent emails that had not been deleted, originally the "From" line showed the external internet address. Since sometime last week that same From: line switched to first list the correct internet email address THEN it says on behalf of and the senders name. If I right click on the senders name it comes up with the senders internal internet properties with tabs that say General, Organization, Phone/Notes/Member of/ Email Address which is all the internal email information. Last week on one of the computers (not the server) I updated Microsoft 2000. HOWEVER, this problem is happening on all computers not just the one updated (via microsoft office 2000 (explorer-tools-windows update). Would that have affected all computers?? How do I fix this problem, we desparately need to fix the internet email feature fast.
  • 5. Outlook Icons appearing on Quick Launch Bar
    The folder icons of Outlook Express have appeared on my Launch Bar in W98. If I delete these shortcuts they get deleted from within Outlook Express. How do I stop them re appearing in the quick launch bar? And get them to stay in the Outlook Express program where they belong! Thanks John

Outlook 2002 Send and Receive Operation Failed

Postby David Frid » Mon, 03 Nov 2003 02:36:35 GMT

I have OL2002, and when I press send/receive, I get the 
message "operation failed" and all I can to is close the 
little popup window.  There is no other error message.
Please help.


Re: Outlook 2002 Send and Receive Operation Failed

Postby Milly Staples [MVP - Outlook] » Mon, 03 Nov 2003 04:18:32 GMT

What types of accounts do you have installed? If you Test Account Settings,
what is the report on the errors tab?  Does your ISP require that you
authenticate before sending?  If you remove and reinstall your mail
account(s), does the message still appear?  What Microsoft Knowledge Base
Articles have you already researched and tried?

Post all replies to the group to keep the discussion intact. Due to the
Swen virus, all e-mails sent to my actual account will be deleted w/out
reading.

After searching google.groups.com and finding no answer
David Frid < XXXX@XXXXX.COM > asked:

| I have OL2002, and when I press send/receive, I get the
| message "operation failed" and all I can to is close the
| little popup window.  There is no other error message.
| Please help.



Re: Outlook 2002 Send and Receive Operation Failed

Postby David Frid » Mon, 03 Nov 2003 23:43:20 GMT

I rebooted and it works fine--I guess I should have tried 
this first, maybe I have put too much faith in XP
thanks

Test Account Settings,
require that you
reinstall your mail
Microsoft Knowledge Base
intact. Due to the
>>Swen virus, all e-mails sent to my actual account will 
be deleted w/out
>>reading.
>>
>>After searching google.groups.com and finding no answer
>>David Frid<< XXXX@XXXXX.COM >> asked:
>>
>>| I have OL2002, and when I press send/receive, I get the
>>| message "operation failed" and all I can to is close 
the
>>| little popup window.  There is no other error message.
>>| Please help.
>>
>>
>>.
>>

Re: Outlook 2002 Send and Receive Operation Failed

Postby Matt » Tue, 09 Dec 2003 08:49:29 GMT

I have the same error as David and this is what happens 
with me: When I test the account settings, no errors are 
shown, the ISP doesn't require authentication before 
sending, I have removed and reinstalled outlook and the 
mail account and the message still appears. I looked 
through the knowledge base but found none that suited this 
specific problem. The OS is windows 2000. 

I couldn’t find the answer to David’s problem so I posted 
this response.

Thanks

Matt
Account Settings,
require that you
your mail
Microsoft Knowledge Base
intact. Due to the
>>Swen virus, all e-mails sent to my actual account will be 
deleted w/out
>>reading.
>>
>>After searching google.groups.com and finding no answer
>>David Frid<< XXXX@XXXXX.COM >> asked:
>>
>>| I have OL2002, and when I press send/receive, I get the
>>| message "operation failed" and all I can to is close the
>>| little popup window.  There is no other error message.
>>| Please help.
>>
>>
>>.
>>

Re: Outlook 2002 Send and Receive Operation Failed

Postby Jeff Stephenson [MSFT] » Thu, 11 Dec 2003 03:25:56 GMT

Does  http://www.**--****.com/ ;en-us;312354 address
the problem?

-- 
Jeff Stephenson
Outlook Development
This posting is provided "AS IS" with no warranties, and confers no rights






I have the same error as David and this is what happens
with me: When I test the account settings, no errors are
shown, the ISP doesn't require authentication before
sending, I have removed and reinstalled outlook and the
mail account and the message still appears. I looked
through the knowledge base but found none that suited this
specific problem. The OS is windows 2000.

I couldn’t find the answer to David’s problem so I posted
this response.

Thanks

Matt
Account Settings,
require that you
your mail
Microsoft Knowledge Base
intact. Due to the
>>Swen virus, all e-mails sent to my actual account will be
deleted w/out
>>reading.
>>
>>After searching google.groups.com and finding no answer
>>David Frid<< XXXX@XXXXX.COM >> asked:
>>
>>| I have OL2002, and when I press send/receive, I get the
>>| message "operation failed" and all I can to is close the
>>| little popup window.  There is no other error message.
>>| Please help.
>>
>>
>>.
>>



Re: Outlook 2002 Send and Receive Operation Failed

Postby matt » Thu, 11 Dec 2003 10:23:17 GMT

No, it doesn't, i tried that and it still has the same 
error, that article has an error that is displayed 
as: 'The operation failed. An object could not be found.' 
but the error i receive only says 'the operation failed'. 
any other ideas?

thanks

matt


us;312354 address
confers no rights
message


the
>>>| little popup window.  There is no other error message.
>>>| Please help.
>>>
>>>
>>>.
>>>
>>
>>
>>.
>>

Re: Outlook 2002 Send and Receive Operation Failed

Postby Jeff Stephenson [MSFT] » Sat, 13 Dec 2003 01:59:29 GMT

The only other thing I can think of to try is to exit Outlook, delete the
file "outcmd.dat", and restart Outlook.  You can find the file in your
"\Documents and Settings\<your logon name>\Application
Data\Microsoft\Outlook" directory.  If that doesn't work, I'm stumped...

-- 
Jeff Stephenson
Outlook Development
This posting is provided "AS IS" with no warranties, and confers no rights






No, it doesn't, i tried that and it still has the same
error, that article has an error that is displayed
as: 'The operation failed. An object could not be found.'
but the error i receive only says 'the operation failed'.
any other ideas?

thanks

matt


us;312354 address
confers no rights
message


the
>>>| little popup window.  There is no other error message.
>>>| Please help.
>>>
>>>
>>>.
>>>
>>
>>
>>.
>>



Similar Threads:

1.Outlook 2002 - Send/Receive "The operation failed"?

Just got Outlook 2002 as an included program with my HP iPaq 2215.

I've set it up and used it frequently.  But for the second time now, it is
refusing to do anything when you hit "Send/Receive".  It pops up a rather
cryptic one line error message "The operation failed.".  I can't figure out
how to clear this out and how to actually get it to work...the last time, I
reinstalled Outlook off of the HP CD.  It worked fine, up until now.

I have followed an article in the MS Knowledge Base that deals with this,
and deleted and added a new profile, but it doesn't seem to work.  And I
have no idea why...

Mike


2.Send/receive, operation failed message outlook 2002

Hi, I am receiving a message stating operation failed, 
with my 0utlook 2002 pro. When I go to tools, 
send/receive, and click on my account, I can send and 
recieve, but I cannot do it from clicking on the 
send/receive on the toolbar, and the auto send/receive 
does not work. 

My email settings are set up correctly, as I can receive 
my test emails. I tried repairing and 
uninstall/reinstalling outlook, but it did not fix it.


Thanks! 

3.Outlook 2002 "The operation Failed" when clicking Send/Receive

I have Outlook 2002, when I click SEND/RECEIVE, I get the error message "The 
Operation Failed".  No error numbers are listed, that is the exact and 
complete message.  I have looked on the Microsoft website and nothing there 
was helpful.  I tried deleting the email account and adding it, I also 
uninstalled Outlook and reinstalled it.  I can 'Test' my account settings 
and it passes, but I never receive the test email.  I can compose an email 
and click 'Send' and that works fine.  It is not an ISP problem as Outlook 
Express works fine.

So I can send email, but cannot receive it.

Thanks for any suggestions!

Doug


4.Outlook 2002 SP2 "operation failed" send receive

Outlook 2002 SP2 with Windows XP Professional worked for 
years - no problem - now on 2 occasions 
cannot "send/receive" -- popup box says "operation 
failed" no other message and no helpful articles on 
Microsoft knowledge base site (except to create a new 
profile which does not work since other files are not 
transerred over so it is like starting with a blank page -
- not acceptable!). Basically, the send receive settings 
are inoperable -- when I go to check send receive groups 
nothing comes up.  I can test email settings and they 
work fine.  I am very annoyed since I have maintained 
files in Outlook folders for years and like the central 
location for calendar, files, notes, etc.  I teach online 
so this is an urgent problem that needs to be resolved 
once and for all.  I have the Outlook Backup software 
recommeded as an "add on" by Microsoft and also use 
Norton Systemworks and Norton Internet Security.  

5."Operation Failed" in Outlook 2002 on Send/Receive

Our company has 30+ machines still running Office XP (the other 150 or so 
are running various newer versions, and do not exhibit this behaviour), and 
about half of them started displaying the "Operation Failed" dialog box 
whenever a Send/Receive is initiated. This does NOT apply to the initial 
Send/Receive operation that occurs when Outlook starts.

The machines running Outlook XP that do NOT have this issue are the ones 
upon which, a few weeks ago, our technician turned off automatic updates, 
and forgot to re-enable them, so I'm fairly certain it's one of the myriad 
updates released in the last three weeks causing the problem... any clue as 
to which one this may be?  - TIA




6. Operation failed Error in edit send/receive groups - Outlook 2002-

7. Office 2002, XP home, Outlook Send/Receive "Operation Failed"

8. Operation failed when send and receive all-Outlook 2002



Return to MS OFFICE OUTLOOK

 

Who is online

Users browsing this forum: No registered users and 84 guest