Windows 2003 Server x64, CreateService : This driver has been blocked from loading

device driver

    Sponsored Links

    Next

  • 1. control multiple modems
    Hi, I have a general question and that is: Can I develop on NDIS to control multiple modems? e.g. decide which modem should be on and send data through at each time without a need to restart the OS?? At the same token, can I detect if my LAN is disconnected then dial through modem? if yes, is there examples that you can refer me to? and finally do I have to buy the DDK or can I download it? ( I've download the windows SDK)!!! would appreciate your feedbacks.
  • 2. Microsoft Approved USB2.0
    I would like to test my high speed USB2.0 device on several different USB2.0 hubs. Is there a list of hubs that were approved/passed WHQL? yariv
  • 3. logitech mouse driver usb ->ps2 on laptop:problems
    Using a laptop Dell Latitute I use a Logitech optical usb-mouse with the driver: mouseware 9.76 under windows 2000; the mouse has a scrolwheel; the laptop has only one usb-port, wich I want to use for my webcame together with the optical mouse Trying to use the ps2-port (mouse with special connection-bus) the pc doesn't see the mouse; looking via configuration, hardware the result is: the mouse is working perfect Using a compac-mouse (without wheeldriven scrollbutton) on the same port: all is oke; using the logitech mouse on usb-port all is oke What can be the problem and how can I solve this problem M. van de Ven.
  • 4. Virtual Midi In driver
    Hi all I'm trying to know what is the best option for Windows OSs (Above 98SE) to use as a base to develop a virtual Midi In driver. I would like to map DirectInput informations to this Midi In port so that I will be able to control software like Rebirth for example. Is there a way to develop something just in user mode or I need to do a kernel driver to do my virtual midi driver Th Vince
  • 5. Assigning a MAC address to a virtual adapter
    I need to assign a MAC address to a virtual adapter (of IM). Is there any algorithm for this? Can I just use the MAC address of the underlying NIC's? If so, any conflicts? Thanks in advance.

Windows 2003 Server x64, CreateService : This driver has been blocked from loading

Postby misiu » Thu, 15 Nov 2007 23:10:42 GMT

Hello,

I'm using special driver for handling raw Ethernet frames which I 
partially developed. Up to now all the development was done on WinXP SP2 
(everything is fine) but after I moved to Windows 2003 Serve x64 when 
I'm trying to load driver via CreateService function I'm getting this 
message "This driver has been blocked from loading". Of course I have 
64-bit version of this driver cross-compiled on WinXP using WINDDK ver. 
3790.1830.

What could be a problem and how to solve it?

Regards,
Bartek

Similar Threads:

1.Using Windows XP x64 Drivers with Windows Server 2003 x64

Can anyone out there tell me if the Windows XP x64 dfrivers will work on 
Windows Server 2003 x64? I want to load a x64 windows OS so that it can host 
Virtual Server 2005 R2 . I want to use Windows Server 2003 x64 but my 
motherboard (Intel D955XBKLKR 955XE with Intel 830 dual-core processor) only 
has all the Windows XP x64 drivers. Has anyone installed Windows Server 2003 
on this motherboard? Your assistance is very much appreciated. Thanks...

Orgbrat 


2.Windows Server 2003 x64 Edition Access driver

I want to be able to connect to Access databases from my  Windows Server 
2003 R2 x64 Edition. There is not Access driver installed on ODBC control 
panel. Also, i have downloaded Jet drivers but always says that they are not 
for my hardware platform.

What can I do? What is the correct download?

best regards
John 


3.Windows Server 2003 x64 SCSI fibre channel driver

We have noticed a different behaviour between the Windows Server 2003 x64 and 
x86 SCSI fibre channel drivers.

Is this the appropriate discussion group for this type of question? 

4.ODBC Drivers in Windows Server 2003 x64

Running Server 2003 x64 Edition on a Dell Poweredge 2850 and I'm trying to 
set up ODBC connections.  The only driver listed though is for SQL Server 
2000.  Are there any known compatible ODBC drivers for x64 that support dBase 
IV access?

I've tried installing several and even though they all install just fine, 
nothing updates in the ODBC driver list.  Does anyone at least have 
suggestions?  Should we abandon our project and go back to 32bit Windows 
(which works fine as you would expect)...

5.Need 64-bit Si3114 driver for RTM version of Windows 2003 Server X64

Hello,

I cannot install the RTM version of Windows 2003 Server on my new Tyan 2882 
server because the drivers for the SATA controller (Silicon Image SiL3114) 
throw errors on the install.  I suspect that the drivers will only work with 
the RC2 version of Windows Server.  Does anyone have a link to a new driver 
(or an install process) that will allow me to install the operating system 
on this hardware?  I cannot believe that the vendors (both Tyan and Silicon 
Image) are not ready for the public release of the new operating system. 
Short of that, does anyone know any IDE SATA controller that does have 
supported drivers?   I cannot find any hardware compatibility information on 
the Microsoft website that is specific to this version of the operating 
system.

Thanks,
Shan McArthur 


6. Windows Storage Server 2003 R2 x64 and Printer Drivers for x32 Clients

7. Access Driver in Windows Server 2003 x64

8. location of ODBC drivers for SQL 2k5 x64 in Win Server 2003 x64 ST



Return to device driver

 

Who is online

Users browsing this forum: No registered users and 5 guest