Exch 2k7 Client Access Role installation fails

Programming and Web Development Forums - Exchange 2000 - Microsoft Exchange Server

Skip to content

Exch 2k7 Client Access Role installation fails

Exchange 2000
Post a reply

    Next

  • 1. Migrating Exchange
    We currently have an Exchange 2000 Enterprise Server. We are planning on replacing this with a new server running Exchange 2003 Standard Server (since Enterprise is more than we require). Therefore I am writing to check that you can migrate Exchange 2000 Enterprise mailboxes to an Exchange 2003 Standard Server? I know that you cannot do an in-place upgrade from Exchange 2000 Enterprise to Exchange 2003 Standard, but is a migration possible? Thanks.
  • 2. is wont start
    I am having problem starting the IS in exchange 5.5
  • 3. E2K3 on multiple domains and 2 DCs
    Hello. I am going to implement E2K3 on 2 Windows Servers. One is a DC in the forest root called : root.com and the second will also be a DC in a child domain called child.root.com. The domain child.root.com is in a branch office in a different geo location. The servers will be working in the same administrative group but in different routing groups and will be accepting mail for root.com only (there will not be a child.root.com mail domain). I want to know if this setup will cause problems and if there are any workarounds for potential problematic situations. Thank you.
  • 4. Introducing Exchange 2003 in an existing Exchange 2000 environment
    I had a Windows 2000 AD that I upgraded to Windows 2003 AD and upgraded the primary server to Windows Server 2003. I still have an Exchange 2000 server that is part of the domain and is working fine. I want to be able to install an Exchange 2003 server and move all the mail boxes over to it and then remove Exchange 2000. My question would be, can I just install Exchange 2003 on a Windows Server 2003, if so do I still need to run Adprep /forestprep /domainprep? How should I introduce the new Exchange 2003 server into my environment while still running Exchange 2000? What steps do I need to take to have both Exchange 2000 and Exchange 2003 on the same domain Thanks in advance Mike W

Exch 2k7 Client Access Role installation fails

Postby TWF2ZXJpY2s » Wed, 31 Jan 2007 22:43:00 GMT

i,

I am installing Exch2k7 32bit evaluation version on Window 2k3 Enterprise
server. During installation I selected the following to be installed:

1) MailBox Role
2) Client Access Role
3) Hub Transport Role

The Mailbox role was installed successfully; however the installation of
Client Access Role fails with error message

Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:29
Client Access Role
Failed
Error:
The path 'C: \Program Files\Microsoft\Exchange Server\ClientAccess\owa' does
not exist on 'EXCHANGE2K7-32'.
Parameter name: Path

Elapsed Time: 00:00:29

The ExchangeSetup.log gives the following error:

[1/30/2007 2:58:02 PM] [2] Launching sub-task '$error.Clear();
$RoleNoSelfSignedCertificates = $False'.
[1/30/2007 2:58:02 PM] [1] Executing '$RoleUpdatesDir =
"E:\Exch2k7\Updates"', handleError = False
[1/30/2007 2:58:02 PM] [2] Launching sub-task '$error.Clear();
$RoleUpdatesDir = "E:\Exch2k7\Updates"'.
[1/30/2007 2:58:02 PM] [1] Setup failed previously while performing the
action Install. Looking for the failed task with ID f9f1ef99.
[1/30/2007 2:58:02 PM] [1] Found 65 tasks to execute
[1/30/2007 2:58:02 PM] [1] Processing component 'OWA Configuration'
(Configuring Outlook Web Access for Client Access role.).
[1/30/2007 2:58:02 PM] [1] Executing '$InternalOwaUrl="https://" +
$RoleFqdnOrName + "/owa"; new-OwaVirtualDirectory -DomainController
$RoleDomainController -InternalUrl $InternalOwaUrl;', handleError = False
[1/30/2007 2:58:02 PM] [2] Launching sub-task '$error.Clear();
$InternalOwaUrl="https://" + $RoleFqdnOrName + "/owa";
new-OwaVirtualDirectory -DomainController $RoleDomainController -InternalUrl
$InternalOwaUrl;'.
[1/30/2007 2:58:02 PM] [2] Beginning processing.
[1/30/2007 2:58:02 PM] [2] Administrator Active Directory session settings
are: View Entire Forest: 'True', Configuration Domain Controller:
'Exchange2k7-32.Exch32.com', Preferred Global Catalog:
'Exchange2k7-32.Exch32.com', Preferred Domain Controllers: '{
Exchange2k7-32.Exch32.com }'
[1/30/2007 2:58:02 PM] [2] Searching objects "Exchange2k7-32.Exch32.com" of
type "Server" under the root "$null".
[1/30/2007 2:58:02 PM] [2] Previous operation run on domain controller
'Exchange2k7-32.Exch32.com'.
[1/30/2007 2:58:02 PM] [2] Processing object "EXCHANGE2K7-32\owa".
[1/30/2007 2:58:03 PM] [2] [ERROR] Unexpected Error
[1/30/2007 2:58:03 PM] [2] [ERROR] The path 'C:\Program
Files\Microsoft\Exchange Server\ClientAccess\owa' does not exist on
'EXCHANGE2K7-32'.
Parameter name: Path
[1/30/2007 2:58:03 PM] [2] Ending processing.
[1/30/2007 2:58:03 PM] [1] The following 1 error(s) occurred during task
execution:
[1/30/2007 2:58:03 PM] [1] 0. ErrorRecord: The path 'C:\Program
Files\Microsoft\Exchange Server\ClientAccess\owa' does not exist on
'EXCHANGE2K7-32'.
Parameter name: Path
[1/30/2007 2:58:03 PM] [1] 0. ErrorRecord: System.ArgumentException: The
path 'C:\Program Files\Microsoft\Exchange Server\ClientAccess\owa' does not
exist on 'EXCHANGE2K7-32'.
Parameter name: Path
[1/30/2007 2:58:03 PM] [1] [ERROR] The path 'C:\Program
Files\Microsoft\Exchange Server\ClientAccess\owa' does not exist on
'EXCHANGE2K7-32'.
Parameter name: Path
[1/30/2007 2:58:03 PM] [1] Setup is halting task execution because of one or
more errors in a critical task.
[1/30/2007 2:58:03 PM] [1] Finished executing component tasks.
[1/30/2007 2:58:03 PM] [1] Ending processing.
[1
Top

Similar Threads:

1.Exchange 2007 Installation; Client Access Role 

I am trying to Install Exchange 2k7 on Windows Server 2008. I've gone through 
the whole nine yards of preinstallation checks b/c its going to coexists in 
an Exchange 2000 Environment. I have both windows 2000 and 2k3 DCs. 
The Readiness checks out allright. Everything goes OK for the typical 
Exchange installation but the installation fails for Client Access Role. I 
get the following error:

Client Access Role
Error: An error occurred while creating the IIS virtual directory
'IIS://exchangeserver.domain.com/W3SVC/1/ROOT/Microsoft-Server-ActiveSync' 
on 'exchangeserver' . Requested Resgistry access is not allowed.

I think its a permissions issue but am not sure exactly which registry I 
need to give permissions to. Help anyone...

2.E2K7 Client Access Role Installation Error 

We installed E2K7 and ran with 2003 also. Migrated our mailboxes over and 
eveything is fine. Had to manualy remove the 2003 instance due to hardware 
problems.

Now when i come to setup another E2K7 client access role only server i get 
the follow error:

Summary: 1 item(s). 0 succeeded, 1 failed. 
Elapsed time: 00:00:15


Client Access Role
Failed

Error:
Exchange server "domain/Configuration/Deleted Objects/Servers
DEL:02c4c53b-c3c8-4bbd-9a3c-753963d01a31/old server name
DEL:47b2d487-785a-4365-b3f3-fc7c8a9ff468" was not found. Please make sure 
you have typed it correctly.

Elapsed Time: 00:00:15


I have read the other posts which people have written about this but i can 
find no reference to these keys in ldp at all. Can any one please tell me how 
to fix this??

Thanks in advance

Alex.

3.Exchange 2007 Client Access Role faild during installation 

We already have 3 x Exchange 2007 servers (each with MB, HT, CA roles and 
MT) running and we trying to install a fourth one, however we get an error 
message during the setup process for the Client Access Role. The error 
message is "Read Ony MultiValuedProperty does not support this operation".

We went on to install all the other roles except the CA and when we run the 
Exchange Management Console and we go under Server Configuration->Mailbox 
and select the fourth server we get a warning message stating that "Get 
OWAVirtualDirectory: The virtual directory "Exchweb (Default WEb Site)" is 
not configured correctly. This server has the Mailbox role installed, so 
HTTP compression must be disabled. You can use the IIS Manager to disable 
compression."

Whe  we go to IIS MAnager and check under Services for Web Sites, 
compression is not selected/enabled.

Please assist and thanks in advance.

4.Ex2k7 Client Access Role Installation - Registry Error 

Hello Everyone,

I'm trying to install Ex2k7 on a w2k3 domain that is migrated from w2k.

Setup starts fine, until het gets to the Client Access Role. Then I get the 
following error:

'Requested Registry Access is not allowed'

and:
--------------------------------------------------
Summary: 3 item(s). 0 succeeded, 1 failed. 
Elapsed time: 00:00:39

Client Access Role
Failed

Error:
Requested registry access is not allowed.

Warning:
An unexpected error has occurred and a Watson dump is being generated: 
Requested registry access is not allowed.

Elapsed Time: 00:00:39

Mailbox Role
Cancelled

Unified Messaging Role
Cancelled
--------------------------------------------------

And the the installation stops with the creation of a Watson file. These are 
the last lines in this log:

--------------------------------------------------

[5/17/2007 2:20:30 PM] [1] Processing component 'OWA Configuration' 
(Configuring Outlook Web Access for Client Access role.).
[5/17/2007 2:20:30 PM] [1] Executing '$InternalOwaUrl="https://" + 
$RoleFqdnOrName + "/owa"; new-OwaVirtualDirectory -DomainController 
$RoleDomainController -InternalUrl $InternalOwaUrl;', handleError = False
[5/17/2007 2:20:30 PM] [2] Launching sub-task '$error.Clear(); 
$InternalOwaUrl="https://" + $RoleFqdnOrName + "/owa"; 
new-OwaVirtualDirectory -DomainController $RoleDomainController -InternalUrl 
$InternalOwaUrl;'.
[5/17/2007 2:20:30 PM] [2] Beginning processing.
[5/17/2007 2:20:30 PM] [2] Administrator Active Directory session settings 
are:  View Entire Forest: 'True', Configuration Domain Controller: 
'xxx-xxx-2k3.xxxxx.xxx', Preferred Global Catalog: 'xxx-xxx-2k3.xxxxx.xxx, 
Preferred Domain Controllers: '{ 'xxx-xxx-2k3.xxxxx.xxx }'
[5/17/2007 2:20:30 PM] [2] Searching objects "'xxx-xxx-2k3.xxxxx.xxx" of 
type "Server" under the root "$null".
[5/17/2007 2:20:30 PM] [2] Previous operation run on domain controller 
'xxx-xxx-2k3.xxxxx.xxx.
[5/17/2007 2:20:30 PM] [2] Processing object "'xxx-xxx-2k3\owa".
[5/17/2007 2:20:30 PM] [2] [WARNING] An unexpected error has occurred and a 
Watson dump is being generated: Requested registry access is not allowed.
[5/17/2007 2:20:30 PM] [2] [ERROR] Requested registry access is not allowed.
[5/17/2007 2:20:42 PM] [1] Exception : 
System.Management.Automation.CmdletInvocationException: Requested registry 
access is not allowed. ---> System.Security.SecurityException: Requested 
registry access is not allowed.
   at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)
   at 
Microsoft.Exchange.Management.Metabase.IisUtility.IsSupportedIisVersion(String serverName)
   at Microsoft.Exchange.Management.Metabase.IisVersionValidCondition.Verify()
   at 
Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeVirtualDirectory`1.InternalValidate()
   at 
Microsoft.Exchange.Management.SystemConfigurationTasks.NewOwaVirtualDirectory.InternalValidate()
   at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
   at System.Management.Automation.Cmdlet.DoProcessRecord()
   at System.Management.Automation.CommandProcessor.ProcessRecord()
The Zone of the assembly that failed was:
MyComputer
   --- End of inner exception stack trace ---
   at 
System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
   at System.Management.Automation.Parser.PipelineNode.Execute(Array input, 
Pipe outputPipe, ArrayList& resultList)
   at System.Management.Automation.Parser.StatementListNode.Execute(Array 
input, Pipe outputPipe, ArrayList& resultList)
[5/17/2007 2:20:42 PM] [1] [WARNING] An unexpected error has occurred and a 
Watson dump is being generated: Requested registry access is not allowed.
[5/17/2007 2:20:42 PM] [1] [ERROR] Requested registry access is not allowed.
[5/17/2007 2:20:42 PM] [1] [ERROR] Requested registry access is not allowed.

--------------------------------------------------
I guess it has something to do with registry access when he wants to create 
the Virutal Directories for OWA, and he needs access for that.

The old w2k domain had some freaky group policy on it, which I disabled 
already, but no luck at all.

Who can give me the hint what registry key I need to change (rights) to get 
the installation finished?

Regards, Dirk

5.E2K7: Client Access Role Installation Problem 

We have removed manually an Exchange 2007 and now we would like to setup a 
new Exchange 2007 on a new server but we get this error with the old 
Exchange Server name::

Client Access Role
Failed

Error:
Exchange server "conguide.net/Configuration/Deleted Objects/Servers
DEL:727e3c10-f32b-4137-9e24-f2bee2bbde99/OLD Exchange Server
DEL:d53885d8-9f31-438a-b408-2b9f5bce4752" was not found. Please make sure 
you have typed it correctly.

Elapsed Time: 00:00:16

How can we completly remove the old one?

Regards,
Jens Hartmann

6. Client Access Role Installation Problem

7. Exchange Server component Client Access Role failed.

8. Exchange 2007 Client Access Role Setup fails

Post a reply

Return to Exchange 2000

 

Who is online

Users browsing this forum: No registered users and 37 guest

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group