How do you get the Attention light to go off

Similar Threads:

1.Lightscribe getting lighter & lighter - help please!

I don't know how to explain it exactly. I have burned maybe 40
lightscribed DVD's. I have upgrade the firmware and the INCREASED
contrast software. I burned about 15 DVD the other week and it was
great. Nice dark colour but this week when I went to burn another 5
DVD, they are came out very much lighter then the other ones - even
though it is at the same settings. I have it on BEST and the contrast
software installed. Any one else experience this? Using HP media and an
LG drive. Does the lightscribe run out?  The media for all burns has
been the same HP.

I should also add : when I burn it twice (without removing the media of
course) - I get concentric circle running from the center outwards, so
I don't want to do that anymore.

2.928 wont boot, just get attention light

3.Files gone after doing Restore From Ignite Tape

Hi Guys:

I am wondering if anyone has come across this before!.

I just recovered a downed K570 with the latest Ignite Tape that we had made 
last friday. The tape was created to include only VG00. The ignite ver. is 
B.5.4.50 on B.11.11.

After recovery machine rebooted but we found that our vg01 to vg03 lvol's 
were mounted but had not files. bdf showed all used at 0%. My weekly script 
that collects stats every sunday nite showed that all lvols had at least 50% 
fs full with some close to 80%.

Any ideas what could have happened? Or something I can look into?

Your help is appreciated as always.

Thanks.

Vince. 

4.A1520N Light on On Off switch stays on when the computer shuts down

I have a A1520N. The Blue Light on the On Off switch stays on when the
computer shuts down. It normally shut off when the computer shut down.
The computer is really shut down because when I hit the switch the
computer boots up.
Harold A Climer
Dept. Of Physics Geology, and Astronomy
U.T, Chattanooga 
Rm. 406A Engineering, Math & Computer Science Building
615 McCallie Ave. Chattanooga TN 37403
 XXXX@XXXXX.COM  

5.HP OfficeJet 7310xi does not shut off, scanner light alway on

The printer is supposed to go into a power save mode after a 
configurable time. I configured mine for 1 hour. It didn't work. The 
printer stayed on all the time. What is worse, the scanner light stayed 
on all the time.

I am convinced that this is a firmware problem. My first printer 
(firmware revision RL3001xNx) exhibited this problem but my second 
(RL4001xNx) did not.

My first printer would also get into a state where I could not turn it 
off from the front panel. I would have to yank the power cable from the 
back to get it to turn off.

HP tech support says that this is not a problem. They say that it is 
designed to leave the scanner light on all the time. Huh? Are you 
kidding me?

Of course, by the time the bulb burns out the printer will be out of 
warranty and it won't be an HP problem then - it will be your problem. 
They should say that this is not an HP problem.

I am sure that the HP company line forces the tech support people not to 
admit this problem because they would have a huge problem if everyone 
returned their printer like I did. I don't know if I should believe them 
but they tell me that the only way to upgrade the firmware is for the 
factory to do it. I see no firmware upgrades on the web. Since they gave 
me no alternative, I returned the printer to my vendor and picked up a 
new one.

I was lucky. The printer I got in exchange for the old one had newer 
firmware that fixed the problem. It also fixed some other problems I was 
having.

6. Kayak XAs 7/500 MT: switch off the I/O fan warning light

7. Getting information off of a troubled HDD

8. OfficeJet G95 doesnt go off-hook