Error Message: "Program too big to fit in memory"

misc

    Sponsored Links

    Next

  • 1. downloading cannot initiate.
    I am searching for the answer to this problem, and being that tech support for my service provider, has been reduced to people who know less about computers than I do going down the troubleshooting list, well I broaden my search to include knowledgable people. I can view most web content, but some pages do not load completly, but more severly no file downloads can be initiated. This includes drivers, programs, plugins, upgrades etc. The file download window comes up and everything acts as it should except the status bar does not show any progress, and no data is transfered. This is ponderous because this occurs on my computer, but not my roomates. we both run w2k professional. His computer is full of crap and runs terrribly, while mine has a clean install. The only things loaded on it, in addition to the operating system package, is some software for my videocard, ATI 8500 allinwonder, and the minimal to get online through my service provider; SBC yahoo. I have tried lowering security settings to minimun to see if it would make a difference, but it did not. I am stumped. If anyonw knows anything that may be useful please respond. vince
  • 2. Windows Me freezes with new VGA card
    Hi I recently replaced my 8Mb ATI VGA card with a 64MB (Aopen) GeForce 4 MX440 SE. I have been playing NFS Porsche 2000 without trouble. Problem: Now and then while working in Windows (not playing a game) Windows just freezes. The freeze can be induced by running the My Pictures Screen saver which scrolls the pictures accross the screen. I have a Duron 700Mhz on a MS6340 Mother board. I have heard that some motherboards need modification for using the MX440 cards. My power supply is probably inadiquite, but like I say during actual 3D operation there is no trouble. Are there any settings I need to change? Any suggestions are welcome. Regards SJ
  • 3. hard drive upgrade with win xp ghost.
    I am upgrading a 15G toshiba drive to a 40G ibm drive in a vaio laptop. I want to transfer the current windows xp installation. Currently I use partimage from a linux boot cd to make backups onto an external drive via firewire which works ok. When I try restoring the xp image to the new drive it just hangs when rebooted. What am I missing? I've tried sysprep -nosidgen with no luck. Thanks
  • 4. Fatal Exception after removing mouse
    Please help - Had serial mouse -Device Mgr showed serial mouse (+ (!)ps/2 mouse) but it worked fine. Removed s/mouse, & deleted s/mouse and ps/2 from Dev Mgr,shutdown and connected new ps/2 mouse and booted. Now get black screen saying "registry and system.ini can't find file needed by windows - msmouse.vxd,hit any key to continue". Then windows tries to start,quick flash of searching/finding unknown device then get fatal exception oe 0028:C02B13f8 in VXD IFSMGR(04) + 00012B0C. In Safe Mode have disabled mouse in Dev Mgr and system.ini,can bypass msmouse.vxd but still get to fatal exception. Running W98SE, M/s Intellimouse.
  • 5. VBA with VC++ 7.1 unmanaged
    I am trying to convert an application from VC++ 6.0 to VC++ 7.1 that has support for VBA. We are using VBA 6.3. I am getting errors trying to build this applcaion in VC++ 7.1 using unmanaged code. I am getting the following error... I have tried building the VBA sample called multipad and it also does not compile with the following error. ERROR: ----- c:\Program Files\VBA6SDK\Include\objext.h(331) : error C2011: 'IProfferService' : 'struct' type redefinition c:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\PlatformSDK\Include\ShObjIdl.h(4124) : see declaration of 'IProfferService' Any help is appreciated. sam

Error Message: "Program too big to fit in memory"

Postby mrwawa » Thu, 25 Sep 2003 09:27:37 GMT

I am running Windows XP at home and have Office XP installed.  The
problem is that I need to use equation editor and it is not displayed,
but I found a fix.  The problem is that when I try to run setup.exe
from the command prompt off the CD, I get the error message referenced
above.  I have checked and there seems to be enough memory.  Also, I
having seen references to an old virus that gives the same message
(green joker), but my virus scan doesn't find any viruses.  Any
suggestions of what I should do.  I really need equation editor.

Thanks

Similar Threads:

1.Program too big to fit into Memory message using command prompt

Whenever I try to run a dos-based program under Windows XP 'command prompt' (in accessories), I always get the this error when I try to run the executable - "Program too big to fit into memory".  Anyone know how to increase the available memory to DOS programs, or anything else that would solve this problem?  Thanks in advance

2.IE errors saying "program too big to fit in to memory"

I get an error everytime I try to use Internet Explorer, it says
"program too big to fit in to memory". What causes this and how can i
fix this?

3.'program too big to fit in memory' error [solved]

"Matt" < XXXX@XXXXX.COM > wrote in message
news: XXXX@XXXXX.COM ...
> Hi all,
>
> I can't seem to figure this out.  There's a game I have on CD that I
> installed perfectly on this computer (Windows XP Home) perhaps two or
three
> weeks ago.  Now when I try to run the setup file (same CD) I get the error
> message, "program too big to fit in memory" in a console window.  Then it
> closes.  I checked out Google and the groups already but no-one ever gave
an
> actual answer as to what the problem might be.  My specs are as follows:
>
> Windows XP Home (with Service Pack 1)
> 512 MB DDR RAM
> Pentium 2.4 GHZ
> 80GB Hard Drive (13 gigs free)
>
> I don't understand it.  The CD works fine on another XP machine, but this
> one I get that error message.  I can't recall installing or doing anything
> major to this PC since it worked last  Does anyone have ANY suggestions?
> Thanks,
>
>     Matt

Ok, I'm not exactly sure what the problem was but it works now.  For the
record, I restarted the computer, hit F8, and set it to boot for the 'last
known good configuration' and it worked.  Thanks anyways,

    Matt


4.'program too big to fit in memory' error

Hi all,

I can't seem to figure this out.  There's a game I have on CD that I
installed perfectly on this computer (Windows XP Home) perhaps two or three
weeks ago.  Now when I try to run the setup file (same CD) I get the error
message, "program too big to fit in memory" in a console window.  Then it
closes.  I checked out Google and the groups already but no-one ever gave an
actual answer as to what the problem might be.  My specs are as follows:

Windows XP Home (with Service Pack 1)
512 MB DDR RAM
Pentium 2.4 GHZ
80GB Hard Drive (13 gigs free)

I don't understand it.  The CD works fine on another XP machine, but this
one I get that error message.  I can't recall installing or doing anything
major to this PC since it worked last  Does anyone have ANY suggestions?
Thanks,

    Matt


5.MS-DOS error: Program too big to fit in memory

When I try to open practicaly ANY program, the black MS-
DOS window open and in a blink before its close I can 
see:Program too big to fit memory. No program will start. 
I havent changed ANY settings recently. I tryed to fix it 
by maxing the parameters in Properties of programs, and of 
cmd.exe. Nothings work.

I deinstalled Windows XP, reinstalled it, its the same. 
Its the first time this ever happen to me...

Anybody know on what MS-DOS actually rely on? If I format 
my computer, will it be fixed?

6. run adprep /forestprep error message" program too vig to fit in memory"

7. programs two big to fit in memory

8. Program too big to fit in memory - MS Hotfix Fix 77229



Return to misc

 

Who is online

Users browsing this forum: No registered users and 74 guest