INSTALL BCM - uninstall BCM - install BCM - still no BCM

MS OFFICE OUTLOOK

    Next

  • 1. BCM customize Forms
    Trying to customize "Accounts and Business Contact". Like to add "Group name - Other contacts" and format the "Field" and "Data type" section so I can enter Phone Numbers/ext. in the correct format. I have tried but each time I choose "Data Type" as 'number' and not sure what FORMAT to use under "Data Type". Or if i am going about this the correct way. Any advise would be helpful. Jim
  • 2. Marketing campain filters
    I'm trying to build a marketing campaign. I want to filter on several things, and I can get everything just about right, but I'm running into a wall on this one. My business contacts are under associated accounts. Some accounts have several contacts under them. As part of this marketing campaign, I only want the PRIMARY contact. I can not seem to find the filter for that one. All my category, address and other fields seem to be there. I'm running BCM 2007 on a shared database. Anybody have any hints?
  • 3. Task List and Link to Record field
    When viewing a list of tasks or a To-Do list is it possible to add a column to show the Link to Record field?
  • 4. Trying to get User Fields to Stay
    Im using Outlook Contact Manager that is integrated with Novell Groupwise... My problem is this... I'm adding fields to the contacts table, however after I close outlook and reopen it the changes I made to the fields are not there and it reverts back to the original could of fields... I have to keep going back in and add the fields to the view. .. How do I keep the added fields in the view so its there when I reopen it?? Thanks

INSTALL BCM - uninstall BCM - install BCM - still no BCM

Postby RHJpeA » Thu, 06 Apr 2006 23:48:01 GMT

HI - whew - please help me get my OUTLOOK w/bcm to show my BC's again.

I e{*filter*}dly have the fat 2 disk set of OFFICE SBM 2006. It works but for the 
BCM (the second most important part after email).  In increasingly desperate 
attempts to get it to function correctly, I read and did most of what was 
suggested here in this forum.  I put in CD ONE to put in OUTLOOK, put in CD 2 
to added BCM (and accounting) and after several attempts of install and 
un-install and re-install I got it to work - BUT with NO TOOLBAR. sigh... 2 
days full of frustrating hours I have NO BCM, NO TOOLBAR and NO MORE CLUES as 
to what to do. 

PULEEEEZE TEAM MS - help me get back to work here.  
FEEDBACK CLUES: The registry (as in another post) says: REGDWORD (3) and 
I've done ALL of the updates.  BIG CLUE - I also re-installed WINXP (pro) and 
noticed it added me (log in name) twice, once as DRIX (primary) and NOW I'm 
DRIX.millhouse (my network) with my other programs still listed there but w/o 
functionality to them. (sigh again...)  PULEEEZE help me kidz - im losing 
time - patience - AND the names/numbers to MY CLIENTS!!!!!!! (yikes!) 
THANX - I'll be here waiting for your holy words of cure.  
Drix

Similar Threads:

1.(revised) INSTALL BCM - uninstall BCM - install BCM - still no BCM

An Addendum - 10 minutes later) 
I just went into the DATA FILE MANAGEMENT setting on OLK (outlook) and added 
BCM.  Like before - it installs it but there is NO TOOLBAR so I cannot 
restore - move - or add contact to my old BCM contact database. (from a 
previous version of outlook).  SO - my problems are reduced to ADDING THE BCM 
TOOLBAR to the top of my OUTLOOK 2003 window.
I have the OUTLOOK CONNECTOR showing but no BCM.  thanx again - in advance - 
DRIX
"Drix" wrote:

> HI - whew - please help me get my OUTLOOK w/bcm to show my BC's again.
> 
> I excitedly have the fat 2 disk set of OFFICE SBM 2006. It works but for the 
> BCM (the second most important part after email).  In increasingly desperate 
> attempts to get it to function correctly, I read and did most of what was 
> suggested here in this forum.  I put in CD ONE to put in OUTLOOK, put in CD 2 
> to added BCM (and accounting) and after several attempts of install and 
> un-install and re-install I got it to work - BUT with NO TOOLBAR. sigh... 2 
> days full of frustrating hours I have NO BCM, NO TOOLBAR and NO MORE CLUES as 
> to what to do. 
> 
> PULEEEEZE TEAM MS - help me get back to work here.  
> FEEDBACK CLUES: The registry (as in another post) says: REGDWORD (3) and 
> I've done ALL of the updates.  BIG CLUE - I also re-installed WINXP (pro) and 
> noticed it added me (log in name) twice, once as DRIX (primary) and NOW I'm 
> DRIX.millhouse (my network) with my other programs still listed there but w/o 
> functionality to them. (sigh again...)  PULEEEZE help me kidz - im losing 
> time - patience - AND the names/numbers to MY CLIENTS!!!!!!! (yikes!) 
> THANX - I'll be here waiting for your holy words of cure.  
> Drix

2.Install BCM And BCM SP1 and Outlook crashes and Calender does not

I had Outlook Pro 2003 SP2 installed and then installed BCM.  After the 
install I started Outlook and the BCM failed to finish it install.  After 
removing it and rebooting I finally got it installed, but now I can not use 
the BCM calender function.  When trying to show BCM calender it disappears 
and outlook errors and wants to restart.

3.Getting Old bcm database to new PC with BCM Installed

I recently upgraded to a new PC.  I have installed MS Office 2003 and all 
updates
I have been unable to successfully get my old Business Contact Manager 
database into the new software by trying to get the new PC/BCM to recognize a 
backup copy of the old database and integrate it into the new PC program.

Can anyone explain to me how this should be done?  I'd rather not convert to 
a .csv file if I can avoid it.  Isn't there a way to get the new Business 
Contact Manager to recognize the old database and just bring it in?

thanks

Dave

4.Removing BCM and re-installing BCM

Would someone mind telling me how to remove BCM and reinstall?
Will my contacts remain in outlook?

5.BCM-V2 (Outlook 2003 BCM SP3) TO BCM-V3 (Outlook 2007) Migration

I've got a two backups from my BCM-V2 SP3 installation :
A) Completed Export to BCM (From Outlook 2003)
B) Database Backup From MSSQL 2003 (Express Ed, or Whatever)

I Did a clean install (on Another WorkStation) of Office 2007, then install 
Outlook BCM-V3 (Witch install MSSQL Express Ed 2005, and creates an empty 
database)

I've follow two differents steps to try to make the migration :
A) Import BCM File (From my previous exported BCM (Outlook 2003)).
ERROR : Something like "Outlook can't make the last action", and nothing 
append, another thing is that, I must kill outlook process to get rid of that 
pop-up (Cancel and BACK buttons doesn't work)
B) Restore Database into MSSQL Express 2005:
It seams that this last step is the right one, but, when the process is in 
the middle of the migration, it stops, and shows a pop-up with something like 
"You're not allowed to restore database, plese contact the owner (my self) of 
the database, before restore" (This is not the exactly msg, but the meaning 
is the same)

My last chance, is to backup database, with password, and try to restore 
again, and see what append. No other clue for me, any help ??

Thxs, 

(Excuse my bad english))

6. B2TR Outlook with BCM -- BCM will not run, uninstall, or repair

7. B2TR Outlook with BCM -- BCM will not run, uninstall, or repai

8. BCM 2007 beta won't install or uninstall



Return to MS OFFICE OUTLOOK

 

Who is online

Users browsing this forum: No registered users and 85 guest