1Gbit print server with 2.0 usb

ms windows

    Sponsored Links

    Next

  • 1. DMZ or port forwarding thru Windows internet sharing
    I'm trying to run a server on a Windows XP computer (computer B) that is connected to the internet through internet sharing on another Windows XP computer (computer A). I need to configure computer A to either forward packets coming in on certain ports to computer B, or just set up computer B as the DMZ. I'm not much of a Windows person. Any help would be appreciated. TIA -DJ Craig
  • 2. Symantec 460 router issues (Messenger drops,Alt. Ipsec clients?)..
    I have an SGS460 router.. for some reason, periodically on our LAN.. things will start acting up.. anyone with MSN Messenger or AOL will get disconnected and keep reconnecting periodically.. Once I reset the router things seem to smooth out. We also have internet slowdown issues, every now and again.. again, only going to the router and hitting the power button fixes this issue... As a side issue.. Has anyone successfully been able to use an alternate IPSEC client.. other than Symantec Client 8.0? I'd like to not have to be locked into their product, but I've been unable to get any other clients to connect... Thanks
  • 3. Problem with accepting password
    I've got a few computers in my network. All of them have Windows XP and one has Windows 98. These with win xp log on the server, protected with password correctly, however I'm unable to log from computer with windows 98. Computer states that password is wrong. Operation system on server is Windows server 2003. Thank you for help in advance.

1Gbit print server with 2.0 usb

Postby Ivan » Mon, 03 Nov 2003 00:14:18 GMT

Is there any with at least four LAN prots?



Re: 1Gbit print server with 2.0 usb

Postby CJT » Mon, 03 Nov 2003 05:55:04 GMT




Why would anybody want a Gigabit print server?  That's just silly.

-- 
After being targeted with gigabytes of trash by the "SWEN" worm, I have
concluded we must conceal our e-mail address.  Our true address is the
mirror image of what you see before the "@" symbol.  It's a shame such
steps are necessary.          ...Charlie

Re: 1Gbit print server with 2.0 usb

Postby Ivan » Mon, 03 Nov 2003 07:43:55 GMT









I would go for a 100 Mbit as well, but with a USB



Similar Threads:

1.move ZFS mountpoint from USB 1.1 to USB 2.0 port

I created a mountpoint called /tdusb1 on a USB 1.1 port conncted to a
1TB LaCie hard drive. I discoverd that our system has a USB 2.0 port
and want to move the logical mountpoint to a new physical USB port.
How do I do it?

Actually, I will need to do the same sort of thing from one Solaris 10
system to another in the future. I don't care about plug-and-play and
hot swappable as long as I can read the same drive from different Sun
systems.

I assume that there are ZFS related commands for doing this but don't
want to experiment too much as the USB hard drive already has valuable
stuff on it that I am in the process of backing up, though very
slowly...

Any help greatly appreicated.

Eric

2.how to make usb 2.0 device work on usb 2.0 speed

My BIOS is usb 2.0 enabled. I can see VIA USB 2.0 Enhanced Host
Controller and USB 2.0 Root Hub Device working properly from Device
Manager. My usb 2.0 device is always connected to the 1.0 usb
controller? What do I miss? I'm using Windows 2000 Server SP4. Mother
board is GA-7VRX. Thanks.

3.PCMCI - USB 2.0 & USB 2.0 external hard

4.USB 2.0 not recognized as Hi-Speed USB 2.0

Hello, thanks in advance for any help.

I am running Windows XP Pro with SP2.  I have an MSI KT4V series (MS-6712) 
mainboard with a USB 2.0 pinhead.  MSI added a note at the bottom of the 
appropriate users guide page stating, he USB 2.0 technology is downward 
compatible with USB 1.1 spec.  To use the USB 2.0 ports, you have to install 
the USB 2.0 driver, which is supplied by Microsoft for Windows 2000 and XP.  
If you have any problems regarding the USB 2.0 driver, please visit the 
Microsoft Web site.  . . . . 

I have installed a Vantec card reader with a USB 2.0 port, to provide those 
functions accessible from the front of my system.  The Vantec device is 
plugged into the USB 2.0 pinhead on the mainboard. All seems well until I 
plug my new Sandisk Cruzer Micro USB flash drive in the (purported) USB 2.0 
port. I receive a notice from the system reading, gt;!> This device can 
perform faster.  This USB device can perform faster if you connect it to a 
Hi-Speed USB 2.0 port.  For a list of available ports, click here. Four of 
those six ports are taken, and if I disable the fifth and sixth in the BIOS, 
the Vantec card reader lights up but its USB port is dead.  So, one might 
conclude the port is only kind of being identified as a 2.0 port by the OS.  
It is all over my head; thus, I here asking questions.

Having SP1 then SP2 installed, I would have thought this USB 1.1 to USB 2.0 
problem would have been left far in the past.  Is there a USB 2.0 driver that 
would address this?  If not, does anyone have any idea what is really going 
on here?  Does anyone have a solution to suggest, outside of ignoring it?

Thanks Again,

quillwrite




5.usb 2.0 not working, usb 1.1 is! usb 2.0 hard drive, usb 2.0 probl

I have recently installed an external freecom 160gb hdd to my laptop. I am 
running XP with sp2.

My laptop has 3 usb 2.0 slots of which the enhanced usb drivers are installed.

When i plug in my hard disk in get the error message 

"this usb device can perform faster if you connect it to a hi-speed usb 2.0 
port" 

If you click the baloon it takes you to a screen that showws you a list- 
which looks like:

  + SiS PCI to USB Enhanced Host Controller
               + USB Root Hub (6 ports)
                          Unused Port
                          Unused Port
                          Unused Port
                          Unused Port
                          Unused Port
                          Unused Port

AsI said earlier I have 3 physical ports not 6! and they are all saying 
unused- but the keyboard I am typing this on and the mouse i am using are 
both plugged in?

The device manager shows no problem with any devices!

I flattened my PC, and reinstalled everything agin and its still not 
working! The hard drive works perfectly fine in usb 1.1 though!

Note: originally the ports worked fine!

Whats the problem? Could it be a hardware fault?

 someone please help! its driving me nuts!

Many thanks for your time

Craig

6. usb 2.0 not working, usb 1.1 is! usb 2.0 hard drive, usb 2.0 p

7. USB communing like USB 1.1 or USB 2.0?

8. Problems installing STYLUS CX7800 - USB 2.0 do not recognize print



Return to ms windows

 

Who is online

Users browsing this forum: No registered users and 71 guest