Where are the round rotation handles at each corner of a text box?

VISIO

    Sponsored Links

    Next

  • 1. Visio Stencil for National Instruments components
    Looking for a Visio stencil that contains National Instruments components such as PXI chassis, PXI modules, CRio components, etc.
  • 2. Create a process-diagram from an Excel Sheet.
    I have a matrix data designed in Excel like this: Process1 Process2 Process3 doc1 i o doc2 o i doc3 i o o where 'i' represents input document to Process and 'o' represents output document from Process. My question is: Can I create a process-diagram in Visio form an imported Excel sheet with that design and data? Thanks for your comments. -- Gaspar PM --Adopting methodology--
  • 3. need fire template with sounders,call points and detectors
    is there a fire template for fire alarm systems and emergency lights
  • 4. how to copy excel speadsheet to VISIO. Can anyone help?
    I get one paragraph of text. I would like the speadsheet to display the same way in VISIO ie with same colums.Thanks
  • 5. Modifying shapes
    I am new to Visio, so please forgive me if this question has already been asked. I need to modify the Process, Decision, and Document shapes in the Basic Flowchart template. Specifically, I need to split each shape horizontally into two sections (with a horizontal line separating each section) so I can enter different information in each section. Can anyone tell me how to do that? I tried looking in Visio's help file, but I couldn't find anything? Thanks in advance for any assistance. Bob

Where are the round rotation handles at each corner of a text box?

Postby Sm9lbCBpbiBCcm9va2x5bg » Sun, 26 Jun 2005 03:33:02 GMT

In Visio 2003, I'm trying to rotate text so that it aligns PERFECTLY (EVENLY) 
along the slanting right side of a triangle. According to the manual I'm 
reading, after I choose the text block (rotating) tool, I'm supposed to see 
"green selection handles...along with ROUND ROTATION HANDLES AT EACH CORNER 
OF THE TEXT BOX FRAME."  This works in Visio 2002...but in Visio 2003 I see 
ONLY the rotation handle on top of the text box frame, which (in the case of 
a triangle) only rotates the text box in 15 degree increments, so that I 
cannot align my text evenly along the slanting right side of the triangle.  
Is this a glitch?  HELP, PLEASE!  I'm really frustrated over this.  Thanks!

Re: Where are the round rotation handles at each corner of a text box?

Postby Mark Nelson [MS] » Sun, 26 Jun 2005 13:59:39 GMT

The single rotation handle replaces the corner handles in Visio 2003.  In 
both versions the increment of rotation is determined by the distance the 
cursor is from the shape.  Look in the status bar while you are rotating to 
see the increment.  Try grabbing the handle and making a larger sweeping 
motion with your mouse.  You will get finer increments.

-- 
Mark Nelson
Microsoft Corporation

This posting is provided "AS IS" with no warranties, and confers no rights.

"Joel in Brooklyn" <Joel in  XXXX@XXXXX.COM > wrote in 





Similar Threads:

1.Where are the round rotation handles at each corner of a text


"Mark Nelson [MS]" wrote:

> The single rotation handle replaces the corner handles in Visio 2003.  In 
> both versions the increment of rotation is determined by the distance the 
> cursor is from the shape.  Look in the status bar while you are rotating to 
> see the increment.  Try grabbing the handle and making a larger sweeping 
> motion with your mouse.  You will get finer increments.
> 
> -- 
> Mark Nelson
> Microsoft Corporation
> 
> This posting is provided "AS IS" with no warranties, and confers no rights.
> 
> "Joel in Brooklyn" <Joel in  XXXX@XXXXX.COM > wrote in 
> message news: XXXX@XXXXX.COM ...
> > In Visio 2003, I'm trying to rotate text so that it aligns PERFECTLY 
> > (EVENLY)
> > along the slanting right side of a triangle. According to the manual I'm
> > reading, after I choose the text block (rotating) tool, I'm supposed to 
> > see
> > "green selection handles...along with ROUND ROTATION HANDLES AT EACH 
> > CORNER
> > OF THE TEXT BOX FRAME."  This works in Visio 2002...but in Visio 2003 I 
> > see
> > ONLY the rotation handle on top of the text box frame, which (in the case 
> > of
> > a triangle) only rotates the text box in 15 degree increments, so that I
> > cannot align my text evenly along the slanting right side of the triangle.
> > Is this a glitch?  HELP, PLEASE!  I'm really frustrated over this. 
> > Thanks! 
> 
> 
> 

2.Connector text position wrong when created with rounded corners

In Visio 2003 Professional, picture this:

1. Create an empty document without using a predefined drawing type; i.e. 
use Ctrl+N.
2. Using the connector tool create a connector anywhere in the document. 
Enter a bit of text for the connector. Text is centered on the connector, 
lovely.
3. In Format->Define Styles, select the Line for the "Connector" style. Set 
the Round Corners to 10 mm (any non-zero value will do, the bigger the 
better). Apply and close both dialogues.
4. Create a new _straight_ connector anywhere in the document using the 
Connector Tool. Enter a bit of text.

Notice how the text is not centered on the second connector? Why is that? 
Seems to happen for all connectors _created_ while the style has rounded 
corners. Setting the rounded corners after creating a connector works fine.

Johan

3.Visio 2007, associative(dependent) entity with rounded corners

Hi, How can I create an associative entity that has rounded corners in Visio 
2007?
I tried doing that from the lines properties but it doesn't work. I select 
one of the rounded corners click apply and OK but it stays the same.
Ofcourse I can achieve something like that using the rectangle tool, 
straight lines etc but what would be the point of using visio then.
Let me clarifiy a little, rouding corner works on a normal rectange drawing 
but not on entities. And I couldn't find anything like associative or 
dependent entity type.

Thanks in advance.

4.To add round corners to a rectangle

To add round corners to a rectangle, use in menu Format > Corners.

5.Rounded Corners in an Org Chart

I'm using Visio 2002 and would like to round the corners in an organization 
chart.  I've selected Format > Line and chosen one of the Round corner 
options, but whether I choose Apply or OK nothing happens.  What am I doing 
wrong?

Thanks.

6. Visio 2010: rounded corners on connectors?

7. Control radius of rounded corners

8. Rounding just 2 corners



Return to VISIO

 

Who is online

Users browsing this forum: No registered users and 16 guest