eventdblclick call to local file, publishing visio 2k3 on web

VISIO

    Sponsored Links

    Next

  • 1. Problem debugging Visio Add-in in Studio 2003 with .NET 2 installed
    I have a .NET add-in for Visio that I built using Visual Studio. In the past I have had no trouble debugging it (until i installed Visual Studio 2005). I find that I can't run the Add-in from within Visual Studio in order to debug it. Visio starts up then disappears. The second time I try to run it I get the message. Visio experienced a serious error the last time the add-in 'xxx' was opened. etc I'm running VS 2003. However, I do have VS 2005 installed. I found I could get the problem to go away by uninstalling .NET V2. Of course now the problem is that I can no longer run Studio 2005.
  • 2. Extracting shapes from multiple page drawing
    I'm seeking the VBA code to extract shapes from a multiple sheet drawing in order to create some documentation. Specifically, I'm looking to pull out the constraints across all of the sheets. Taking all the shapes and then filtering them would be ok too. Thanks.
  • 3. DB: Show Nullability
    Is there a way in the visual studio database designer to show column nullability on the diagram?
  • 4. Disable Help Button
    I want to disable the 'Help Button' that gets displayed with the 'Page Setup' dialog or link it to a help file of mine. CyberBhai

Re: eventdblclick call to local file, publishing visio 2k3 on web

Postby QWwgRWRsdW5k » Sun, 06 Jan 2008 03:59:11 GMT

he script calls telnet using the ip address that is stored in the shape. The
custom property name it is using is compIpAddress. This gives me the ability
to select a shape and the telnet to the object. Of course you can name the
property whatever you want. It's just a short cut to make it easier on the
user.
al


"Dr. Dre" wrote:


Similar Threads:

1.eventdblclick call to local file, publishing visio 2k3 on web (lim

2.eventdblclick call to local file, publishing visio 2k3 on web (limits of functionality?)

Hi There,

Some quick questions...

1.  I'm in the process of creating a data center visualization
layout.  And I'm having trouble with the following:

a. I create a room overhead with individual racks, when I double-click
on a given rack, it opens an existing sheet with rack contents.  The
issue I have is if I double-click on my 15th rack, it will jump to the
15th tabbed sheet, if I want to return to the original view (1st tab),
I have to jump to the first page..  which isn't a big deal, but it's
not very intuitive...  Is there a better way I can do this?  (Have the
double-click result in creating a new window I can close to return to
the original, etc)

b. Again, if I double-click on a rack, it opens a tabbed sheet and
shows me the contents..  now, what I'd like visio to do, is when I
double-click on a given component in the rack, have the dblclick event
open a local file on the user's desktop (in this case, a standard
telnet program)

I've tried:
=OPENFILE("C:\Program Files\SecureCRT\SecureCRT.EXE")  (does nothing)
=GOTOPAGE("C:\Program Files\SecureCRT\SecureCRT.EXE") (results in an
error regarding complaining about the file not being a visio file, or
being corrupt)

Can't figure it out.

Lastly,

2.  Is there anyway to preserve the eventdblclick functionality if I
published the visio sheet to the web?


Thanks!

DD

3.Linking between Visio files which have been published as a web pag

Hi Siggiari,

In Visio 2003, if you output the other Visio drawings to html and place them 
on a webserver, you can then link directly to the subpages using parameters. 
In the master Visio drawing, within the hyperlink dialog - browse and link 
to anchors in the other html output.  See the hyperlinks dialog online help 
for information.

-- 
Dick Hamilton
Microsoft Corporation

This posting is provided "AS IS" with no warranties, and confers no rights.


"siggiari" < XXXX@XXXXX.COM > wrote in message 
news: XXXX@XXXXX.COM ...
>I got a big project going on which uses few dozens of visio files and they 
>are published in html format. I want to connect between 1 visio file saved 
>as html to, e.g. page 4 in another visio file saved in html format. They 
>can be easily connected when i'm still in .vsd format but when i save to 
>html the link brakes. I only seem to be able to link to the first page in a 
>visio file that is saved as html. So the question is:
>
> Is there anyway that you could put a hyperlink in a visio filed saved in 
> html format to a page within a visio file that is also saved in html 
> format?
>
> I got a small workaround which i don't think i can use as it always pops 
> up an error in IE. If i publish the visio file in .gif format (doesn't 
> work with .vml) i can link directly to the sub html file (e.g. if the file 
> is called Meeting.htm then the page no. 4 is Meeting_gif_3.htm) but as i 
> said there pops up an error that i don't think i can fix. Note tho that 
> this workaround works fine with Visio 5 format which is the format i save 
> the .vsd files now in (i'm trying to update the files to Visio 2003).
>
> The error i got in the workaround is:
> Not implemented
> [in the line]
> document.onclick = clickMenu; 


4.Linking between Visio files which have been published as a web

I've been testing it out and trying to find what parameters you are refering 
to. I don't seem to find it as the parameters aren't visible in html files 
saved from Visio. I only see the # mark at the end and that is it. I tried 
useing number of page and name of page as a parameter but it doesn't work.

On the other solution. There aren't any anchors in the visio pages that i 
can link to and if i try to link directly to the html files i get the same 
error as i talked about earlier. I can't find any help in the help files. 

I just need a little bit more detailed description on how to do things...

With excuses on not getting it the first time and thanks for the help,
Siggi Ari

"Dick Hamilton [MSFT]" wrote:

> Hi Siggiari,
> 
> In Visio 2003, if you output the other Visio drawings to html and place them 
> on a webserver, you can then link directly to the subpages using parameters. 
> In the master Visio drawing, within the hyperlink dialog - browse and link 
> to anchors in the other html output.  See the hyperlinks dialog online help 
> for information.
> 
> -- 
> Dick Hamilton
> Microsoft Corporation
> 
> This posting is provided "AS IS" with no warranties, and confers no rights.
> 
> 
> "siggiari" < XXXX@XXXXX.COM > wrote in message 
> news: XXXX@XXXXX.COM ...
> >I got a big project going on which uses few dozens of visio files and they 
> >are published in html format. I want to connect between 1 visio file saved 
> >as html to, e.g. page 4 in another visio file saved in html format. They 
> >can be easily connected when i'm still in .vsd format but when i save to 
> >html the link brakes. I only seem to be able to link to the first page in a 
> >visio file that is saved as html. So the question is:
> >
> > Is there anyway that you could put a hyperlink in a visio filed saved in 
> > html format to a page within a visio file that is also saved in html 
> > format?
> >
> > I got a small workaround which i don't think i can use as it always pops 
> > up an error in IE. If i publish the visio file in .gif format (doesn't 
> > work with .vml) i can link directly to the sub html file (e.g. if the file 
> > is called Meeting.htm then the page no. 4 is Meeting_gif_3.htm) but as i 
> > said there pops up an error that i don't think i can fix. Note tho that 
> > this workaround works fine with Visio 5 format which is the format i save 
> > the .vsd files now in (i'm trying to update the files to Visio 2003).
> >
> > The error i got in the workaround is:
> > Not implemented
> > [in the line]
> > document.onclick = clickMenu; 
> 
> 
> 

5.1 file, 1 page, many layers-need to publish to web showing each la

You can select a layer with Edit=>Select by type=>layers

You can also write few line of vba code to export to html as you can fire 
each visio command with vba code
"Lisa" < XXXX@XXXXX.COM > a rit dans le message de news: 
 XXXX@XXXXX.COM ...
> I'm not sure how to ask this. I have 1 file with a single page that 
> contains
> many layers. I want to select particular layers and create a webpage and I
> need to do this for many webpage. It looks like the only way to do this is 
> to
> create a Page for each layer(s) that I want. Is this true or is there 
> another
> way to do it?
>
> I did a test of copying what I wanted to each page and it worked, except 
> not
> everything lined up exactly. Is there a way to select the layers I want in
> that single page and have them go to a new page and keep the exact 
> location?
>
> Any help would be appreciated. Thanks.
>
> Lisa 




Return to VISIO

 

Who is online

Users browsing this forum: No registered users and 25 guest