Two NICS, Two IP Addresses - ONE SERVER NAME

Programming and Web Development Forums - Windows - Microsoft Windows 2000

Skip to content

Two NICS, Two IP Addresses - ONE SERVER NAME

Windows
Post a reply

    Next

  • 1. DNS server OS upgrade
    HI , i am running DNS on NT 4.0 server, which also provides services for WINS & DHCP. Is just upgrading the OS to Windows 2000 will give me any trouble..e.g. client connections,resolution, delays etc. Is there anything i should take care before this upgrade. Thanks Novice
  • 2. zone subdelegation
    I am trying to delegate a subzone of my domain (Active Directory in native mode on Win2K) to a UNIX box. Can it be done? Do I have to go back to mixed-mode? If it can be done, would appreciate how-to. What I have tried so far does not seem to be correct.
  • 3. Effect of removing NS records for Operations Masters
    What would be the impact of removing the NS records for DC's with FOrest and Domain FSMO roles? //FC

Two NICS, Two IP Addresses - ONE SERVER NAME

Postby b2todW50aW4 » Wed, 01 Dec 2004 04:19:03 GMT 

Setup - Internet monitoring system setup w/ two NICS each has a seperate IP 
address (both in same subnet).  Only one has default gateway setup - problem 
is that it's automatically getting registered in DNS w/ two IP addresses for 
same name which is causing sporradic problems.  Any ideas on how to configure 
this in DNS to eliminate the DNS confusion?

Thanks in advance!
Top

Re: Two NICS, Two IP Addresses - ONE SERVER NAME

Postby Kevin D. Goodknecht Sr. [MVP] » Wed, 01 Dec 2004 05:19:27 GMT 


okhuntin < XXXX@XXXXX.COM > commented
Then Kevin replied below:

Two ways to resolve this.
Add this registry value:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DNS\Parameters
On the Edit menu, click Add Value, and then add the following registry
value:
Value name: PublishAddresses
Data type: REG_SZ
Value data: Specify the Internet Protocol (IP) address of the interface you
want the record for.
-or-
You can also use the listener IP address on the Interfaces tab, DNS will
only create the host for the IP address listed, but if you want DNS to
listen on all IP addresses and create only one record use the registry
entry.


-- 
Best regards,
Kevin D4 Dad Goodknecht Sr. [MVP]
Hope This Helps
===================================
When responding to posts, please "Reply to Group"
via your newsreader so that others may learn and
benefit from your issue, to respond directly to
me remove the nospam. from my email address.
===================================
 http://www.**--****.com/ 
===================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
 http://www.**--****.com/ ~jain/software/oe-quotefix/
===================================
Keep a back up of your OE settings and folders
with OEBackup:
 http://www.**--****.com/ 
===================================
Top

Re: Two NICS, Two IP Addresses - ONE SERVER NAME

Postby Steve Duff [MVP] » Wed, 01 Dec 2004 05:28:42 GMT 

This article explains the issues and how to disable autoregistration
globally or for a specific adapter:

 http://www.**--****.com/ ;en-us;246804

Multiple NICs on the same subnet is not normally a useful configuration
in any version of Windows Server. But possibly with a diagnostic setup
you have some need for it?

Steve Duff, MCSE, MVP
Ergodic Systems, Inc.
Top

Similar Threads:

1.two domains, two subnets, two sbs servers, one email address 

can this be made to work:

two domains on seperate subnets, each running a SBS 2003 and exchange server 
receiving email for the same external domain but for different users.  For 
example  XXXX@XXXXX.COM  is on one server and  XXXX@XXXXX.COM  
is on the other serve.

2.configure two NICs into one IP addresses 

Hi there,
is there anybody know how to configure two network interface cards (NIC) 
into one local connection on a win2k3 server?
thanks,

3.Two NICs / Two Networks / One Machine 

Here's the situation:  I have both DSL (pokey 800k) and Cable (2500k, usually) broadband modems in my SOHO.  I'd like to have both of these hooked up, not to run in a "Dual WAN" mode, but in an "either/or" mode

Is this possible

4.two dsl connections, two routers, dual nics on linux box , want to run two websites 

Hello,

I have two dsl connections, with one public ip on each. I have a linux
box with two nic cards.

xx.xx.xx.xx(WAN)---ROUTER(LAN23.123.45.110) ---- MYLINUX
(23.123.45.107) eth1
yy.yy.yy.yy(WAN)---ROUTER(LAN192.182.1.1)   ---- MYLINUX
(192.168.1.100) eth0

I have apache listening on both interfaces. 

Problem:

1. How do I make the packets route back to the gateway from which they
originate.

Currently the gateway marked as "default" is able to serve content
from the apache. The other one cannot.

I tried adding static routes, but that didn't work.

Any help is appreciated.

Thanks
Jay

---------------------------------------------------------------------
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref   
Use Iface
adsl-23-123-45- adsl-23-123-45- 255.255.255.255 UGH   0      0       
0 eth1
23.123.45.0     *               255.255.255.0   U     0      0       
0 eth1
192.168.1.0     *               255.255.255.0   U     0      0       
0 eth0
loopback        *               255.0.0.0       U     0      0       
0 lo
default         192.168.1.1     0.0.0.0         UG    1      0       
0 eth0


eth0      Link encap:Ethernet  HWaddr 00:0D:87:57:A0:DE
          inet addr:192.168.1.100  Bcast:192.168.1.255 
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3060612 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3577217 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:1566982235 (1494.3 Mb)  TX bytes:1126616733 (1074.4
Mb)
          Interrupt:11 Base address:0xe000

eth1      Link encap:Ethernet  HWaddr 00:40:05:39:0E:EA
          inet addr:23.123.45.107  Bcast:68.123.24.255 
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:90635 errors:0 dropped:0 overruns:0 frame:0
          TX packets:31082 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:23017102 (21.9 Mb)  TX bytes:13283751 (12.6 Mb)
          Interrupt:11 Base address:0xe000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:11888 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11888 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:6920794 (6.6 Mb)  TX bytes:6920794 (6.6 Mb)

5.Two Name Servers, one IP? 

Hello: 

I have a singel box hosted at an ISP that for the moment has a single
Internet addressable IP.   

Can I host two name servers (ie NS1.acme.com and NS2.acme.com) using
the same IP address? 

Thanks.

6. Two Servers, one external IP address, Sharepoint and Exchange

7. Two servers upgraded to WIndows 2003 can browse by name but not IP address

8. one ip for two web server with different names

Post a reply

Return to Windows

 

Who is online

Users browsing this forum: No registered users and 9 guest

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group