Does a table exist of rev numbers for DLLs?

windows 64bit

    Sponsored Links


  • 1. Backup Software for 64 bit
    I have used Norton Ghost for years on my 32 bit system for backups and learned that it is not supported on the 64 bit system. Has anyone found suitable replacement backup software for XP Pro 64? I am looking for software that does a byte-by-byte exact copy of my hard drive, like Ghost does, not just files backups. Please let me know if you have any suggestions....Thanks.
  • 2. utility tool
    Is there any utility tool is available to check the hardware campatibality before installing windows x64
  • 3. New Install Logon Problem
    Hello, I installed Windows 2000 Pro and Upgraded to Windows XP Pro. The install and upgrade to XP went just fine. During the install for W2K, it asks if you want user to press Ctrl+Alt+Del or just login using the username you specify. I chose to just log in and not prompt for Ctrl+Alt+Del. Now that it's upgraded to XP Pro, it still just logs me in directly with the username I specified during the W2k install. I went to User Accounts in Control Panel and deleted that user. Now when I start the computer it gives me an error stating that user does does not exist, hit Ok to continue or something like that. And then it goes to the Windows XP Welcome screen. My question is, how can i get it to go directly to the Windows XP Welcom screen and not try to login as the previous W2K user. It's just soo very annoying when that message pops up everytime. Does anyone know how I can fix this? Thanks in advance. -- Raghbir Flora Systems Administrator
  • 4. NumLock on Bootup ?
    Is there a software solution to set the NumLock On when you bootup. That option has always been in the BIOS but the BIOS (Phoenix) on my new PC doesn't have this option -- Rod K
  • 5. Tyan 2885 mother board
    I am using a tyan 2885 mother board dual 244 opterons 4 gigs corsair memory. I am using a highpoint 1820 raid card not on board raid controller, dual boot xp mirrored and xp 64 mirrored. The question is I am not using current bios for mother board or raid controller and would like to update them. Tyan says I will have to reinstall operating systems which is something I would like to avoid. Xp pro 32 runs beautifully as does xp 64 with a wmi error message. annoying but it does not seem to be doing anything. newer bios are supposed to fix it. Thanks

Does a table exist of rev numbers for DLLs?

Postby miso » Sun, 22 Apr 2007 15:48:03 GMT

his weird problem I have with photoshop has returned. I'd like to
verify I have the latest revs of DLLs installed. This list comes from listdlls program.

I did a "restore" install of X64, then installed the service pack and
the latest drivers. I'm contemplating doing a complete reinstall since
I have the use data on a different partition from the OS. Still, I'd
hate to reinstall every program. BTW, I tried the eval versions of the
latest Photoshop (CS3), and it hangs up too, so I don't see a simple
solution here.
Photoshp.exe pid: 3464
Command line: "C:\Program Files (x86)\Adobe\Photoshop

Base Size Version Path
0x00400000 0xdc2000 6.00.0128.0000 C:\Program Files (x86)\Adobe
\Photoshop 6
0x7d600000 0xf0000 5.02.3790.3959 C:\WINDOWS\system32\ntdll.dll
0x7d4c0000 0x130000 5.02.3790.3959 C:\WINDOWS
0x014a0000 0x9b000 5.02.3790.3959 C:\WINDOWS
0x7da20000 0xe0000 5.02.3790.3959 C:\WINDOWS\syswow64\RPCRT4.dll
0x7d8d0000 0x50000 5.02.3790.3959 C:\WINDOWS
0x7d930000 0xd0000 5.02.3790.4033 C:\WINDOWS\syswow64\USER32.dll
0x7d800000 0x90000 5.02.3790.4033 C:\WINDOWS\syswow64\GDI32.dll
0x762b0000 0x49000 6.00.3790.3959 C:\WINDOWS
0x77ba0000 0x5a000 7.00.3790.3959 C:\WINDOWS\syswow64\msvcrt.dll
0x01540000 0x52000 6.00.3790.3959 C:\WINDOWS
0x77530000 0x97000 5.82.3790.3959 C:\WINDOWS\WinSxS
0x7c8d0000 0x7fe000 6.00.3790.3959 C:\WINDOWS
0x10000000 0x133000 4.01.0017.0001 C:\Program Files (x86)\Adobe
\Photoshop 6
0x015a0000 0x14f000 4.01.0017.0001 C:\Program Files (x86)\Adobe
\Photoshop 6
0x77670000 0x139000 5.02.3790.3959 C:\WINDOWS\syswow64\ole32.dll
0x76aa0000 0x2d000 5.02.3790.3959 C:\WINDOWS\system32\WINMM.dll
0x71c40000 0x57000 5.02.3790.3959 C:\WINDOWS
0x016f0000 0x25000 1.00.0012.0001 C:\Program Files (x86)\Adobe
\Photoshop 6
0x01720000 0x69000 1.01.0010.0001 C:\Program Files (x86)\Adobe
\Photoshop 6
0x77b90000 0x8000 5.02.3790.1830 C:\WINDOWS
0x01790000 0x8b000 5.02.3790.3959 C:\WINDOWS
0x7dee0000 0x60000 5.02.3790.3959 C:\WINDOWS\system32\IMM32.DLL
0x7dbd0000 0x103000 6.00.3790.3959 C:\WINDOWS\WinSxS
0x01900000 0x17000 10.05.0001.2027 C:\Program Files (x86)\Common
0x73b10000 0x1c000 5.02.3790.3959 C:\WINDOWS\system32\STI.DLL
0x748d0000 0x8000 5.02.3790.0000 C:\WINDOWS
0x770e0000 0x108000 5.02.3790.3959 C:\WINDOWS
0x4b3c0000 0x50000 5.02.3790.3959 C:\WINDOWS\SysWOW64\MSCTF.dll
0x10d00000 0xf000 3.30.0165.0000 C:\Program Files\Logitech
0x01450000 0xf000 3.30.0165.0000 C:\Program Files\Logitech
0x78130000 0x9b000 8.00.50727.0163 C:\WINDOWS\WinSxS

Similar Threads:

1.Copy dll's Exports table to another dll Options


Is there a way to copy a dll's exports table to another dll?

This is what i'm trying to achive:

I have a group of DLLs:

and so on?

Each DLL  in this group ALWAYS exports  func1, func2, func3.
Sometimes, I can find a DLL that belongs to this group that besides
these 3 functions also exports several other functions, for example:
d.dll exports func1, func2, func3  AND  GetStatus() and

I have a  proxy.dll that can be a proxy to all the above group of
In my proxy, I use LoadLibrary() on a.dll for example (in runtime, I
have a way to
know which DLL to load), and then GetProceAddress() on func1-3.
In my proxy.dll I have prototypes for these functions and in these
prototypes I just call the original function with the pointer I got
using GetProceAddress().
Until here, everything is pretty simple and goes ok.

What I need, is a way from my already defined proxy.dll to be a proxy
to DLLs like d.dll, which exports
some other unknown functions, and this has to be in runtime (I don't
want to manually add the unknown exports to my proxy and compile it)
I need to be a proxy in the simplest way there is: just call the
original functions from my DLLs, I don't need to do some operations
before I do it.

Any help?
Is this can be deone by copying a dll exports table to another dll ?

2.regsvr32 regwizc.dll and regsvr32 licdll.dll isn't doing it

I've tried regsvr32 regwizc.dll and regsvr32 licdll.dll to get the activation 
 to go away but it just wont even though windows acknowledges that they were 
successful when I run them. What do I do now? I have one day left before I 
have to re-install yet again

3.Embedding a dialog from dll in main program's splitter View and doing data exchange in dll


Am sorry if the subject looks too long. :-)

Here is my problem. I divide my SDI into 2 columns using dynamic
splitter. I associate the left column with some view. Now i want the
right column's view to show a dialog resource from one .dll. I could
get the dialog resource from the .dll and display it in the right view
by getting the resource ID from the dll ( after loading it ofcourse )
and then using the FindResource() and LoadResource(). But the problem
is that if i enter something in the dialog resource and then click
"Ok", then i expect my handler in the .dll to be called and then
retrieve all the configuration parameters that user enters in the
dialog resource.

But my handler is not getting called, and obviously because of that,
the dll cannot get the parameters entered into the dialog resource.

Is there any way to do this? So that the .dll can contain the dialog
resource, and i can embed it in my main exe after loading that dll.
And then once user clicks ok on the dialog, the appropriate handlers
and data exchange happens inside the .dll, and my main application
neednot care about the configuration parameters that the .dll wants...

Thanks & Regards,

4.dll not a valid Windows image but dll doesn't exist

5.Access linked table - can add new records but can't update existing records

I have an Access 2003 database linked to a simple list (one field) in
Sharepoint 2007. When I open the table in Access, I can add new
records and modify those new records. However when I close the table
and re-open it, I cannot update existing records - I can only add new
ones again. Can anyone help?

6. Table does not exist

7. Crash when adding attachment / Crash replying where tables exist

8. Word 2007 Automatic numbering for Table captions and Figure captio

Return to windows 64bit


Who is online

Users browsing this forum: No registered users and 38 guest