Windows CE 6 locale support

windows ce

    Sponsored Links

    Next

  • 1. vga linear flat framebuffer default resolution
    Is there a way to change the default vga flat framebuffer driver resolution in the registry? Is there a way to change it in nk.bin when it is not loaded with loadcepc.exe? Thanks.
  • 2. Anybody knows repllog parameters?
    I know it is an old question, but .... is there anybody who know the repllog parameters (other than remote)? For example I know that /h exists, but what does it do? Thanks Ricky Catheart
  • 3. PMU Basics
    I've looked in the PB help and Googled looking for information on the Performance Monitor Unit (PMU). There is some information about Remote Performance Monitor but I am looking for what my BSP needs to provide to the Kernel for the PMU to function. I started out with the Lubbock BSP (on a PXA255 processor) and modified it for my custom board. I am not sure what, if anything, I need to alter to make it play within my BSP. Anything special that needs to be altered (registry entrys, etc) ? I understand that the PMU.DLL is not included in the image when BSP_NOPMU is set but I don't know where to set it from. Also, is the PMU a required element to run .Net Compact Framework applications? I don't see it listed but I have heard that it is required.
  • 4. Newbie question about WinCE ethernet setup
    I've been working on getting a lan driver working on a pxa255 board and I have a bit of a dumb question. Sorry, I'm a newbie at WinCE. What happens when the lan driver comes up? We all know that under Windows, you go to the control panel, select the ethernet card, etc etc. A well worn path. I've been looking at a pxa255 demo board and I see in the connections folder two connections named after the two lan chips used on their board. But I don't see how, when you make a new connection, to link that new connection to the underlying ethernet chip. When I make a new connection, I can set the IP and DNS server addresses and set security options, but I don't see any selection for which ethernet driver to use. Does the device loader automatically create an icon in the connections folder for the lan driver when it comes up, using the name in the registry? Or do I have to use some other program to install a new ethernet driver? Thanks in advance.

Windows CE 6 locale support

Postby Igor Golikov » Mon, 27 Jul 2009 13:57:03 GMT

Hi
I am buikding a localized images (for differrent languages support)
for our project.
I have a locale support for fonts and time with no problem, but I can
not get correct software input panel.
My question is : does each locale availabe in Win ce 6 include softare
its own software input panel?
Thanks

Re: Windows CE 6 locale support

Postby Paul G. Tobey [eMVP] » Wed, 29 Jul 2009 01:20:00 GMT

What locale are you trying to use?  No, Windows CE doesn't necessarily 
include a particular SIP for you depending on what locale you are 
targeting...

Paul T.








Re: Windows CE 6 locale support

Postby Igor Golikov » Wed, 29 Jul 2009 13:42:19 GMT

On Jul 27, 7:20m, "Paul G. Tobey [eMVP]" <p space tobey no spam AT





I am talking about Far east languages - Chinese, Japanese, Thai, Korean

Re: Windows CE 6 locale support

Postby Paul G. Tobey [eMVP] » Thu, 30 Jul 2009 00:31:44 GMT

You can include those SIPs by selecting them from the catalog.  Have you 
done that?  If so, which SIPs have you tried?  Have you tried building a 
device that has only *one* far east locale and the corresponding SIP.  I 
seem to remember that, at least at some point in the past, only one far east 
locale was supported in a single build of the OS.  That may no longer be the 
case, but going about getting something to work one locale at a time makes 
more sense than trying, in one step, to build the full OS for four different 
locales (plus having enough room for the OS with all four of those in it is 
going to be a bit more challenging than the average OS).

Paul T.





On Jul 27, 7:20 pm, "Paul G. Tobey [eMVP]" <p space tobey no spam AT





I am talking about Far east languages - Chinese, Japanese, Thai, Korean 



Re: Windows CE 6 locale support

Postby Igor Golikov » Fri, 31 Jul 2009 15:47:28 GMT

On Jul 28, 6:31m, "Paul G. Tobey [eMVP]" <p space tobey no spam AT








Hi
Can I know for sure either Windows CE 6 supports different East
locales in one image?
Is there some source at Microsoft?

Re: Windows CE 6 locale support

Postby Paul G. Tobey [eMVP] » Sat, 01 Aug 2009 00:07:36 GMT

You can read the help, I guess.  I just remember that from some previous 
discussion, meeting, newsgroup post, or Web page.  I don't remember where it 
got into my brain from.

Paul T.





On Jul 28, 6:31 pm, "Paul G. Tobey [eMVP]" <p space tobey no spam AT








Hi
Can I know for sure either Windows CE 6 supports different East
locales in one image?
Is there some source at Microsoft? 



Similar Threads:

1.East asian locale support with ce 5.0.

hi? 
I'm trying to add any file of east asian to os image. 
I tried the followings but all failed. 
1. chinese os build 
 a. set the build option -> locale to chinese(chinese) 
 b. add 'traditional chinese' font ( MingLiu, MS Ming) to os design
 b. sysgen 
 c. add a file of 'traditional chinese' to a bib file
 d. makeimg
 e. boot
After booting the ce device, I could find the os mui was chinese. But the 
added file name is not correctly shown at 'my device'. It is crashed. 

And when I tried again with korean locale, the result was same. 

What is problem with my build process? 
   

2.Windows CE 5 locale settings

Hello, I'm building an application based on Windwos CE 5.
I need to change regional settings (locale) programatically.
I thaught of using SetUserDefaultUILanguage, but after some googling
it seems that the user have to
reset machine and what is strange before reset i had to go to
Settings/System/Regional Settings and change the locale.
Does somebody know how to change default user language and loclae
programatically?
Thanks

3.support a usb host to Windows CE 5 and 6 on CE Emulator

I doing development for Windows CE 5 and 6  USB Driver.
I using Platform Builder 5 and 6.
And I havn't target board.
so I develop using Windows CE Emulator.

I have a question.

Develop for Windows CE USB Driver.
support USB in Emulator  ?

Sorry, My English is bad.

Wait your an answer.

4.IPv6 Teredo support [in Windows CE 5.0 and Windows Mobile 5.0]

Does Windows CE 5.0 [or Windows Mobile 5.0] support Teredo for IPv6
 
Best regards,
Sandeep

5.locales in the CE image

I've created a CE5.0 image and in the "locale" option under platform 
settings I've cleared everything and added back just "french", "english" and 
"Japanese".

I happily build my image and run it. In the control panel- regional settings 
I see a whole different set of locales (ones I didn't include in my image, 
and Japanese for example is not there).

What am I missing?

BTW This is for the PB emulator BSP.

-arnie 


6. Printer Locale Support

7. Locale support

8. Locale Specific Support: Korean



Return to windows ce

 

Who is online

Users browsing this forum: No registered users and 99 guest