Adding cluster services to Windows 2003 Ent. Edition

Similar Threads:

1.Server 2003 Ent, Exchange 2003, Cluster installed windows SP2, now it won't boot

< XXXX@XXXXX.COM > wrote in message
news: XXXX@XXXXX.COM ...
>
> After installing Server 2003 Service Pack 2, one of the clustered
> servers will not load windows.  It gets to the Windows Server loading
> screen, the progress bar is moving, and there is activity on the hard
> drive LED.  However it just sits in this state.  Any thoughts besides
> restoring from backup?
>
>
> To be more specific, this is an IBM x365 with 4 Xeons.  8GB of RAM.  I
> recently added the /PAE switch to the boot.ini file, but rebooted after
>
> that change and it was fine.  Is this possibly a firmware problem?
>
> Brandon Riffel
>

When was Service Pack 2 released?

2.2003 Ent Ed - Cluster Services - Dynamic Disks

I am in the process of migrating from a single server 
Win2K server which is connected by fibre to a remote 
storage system to 2 WK3 servers configured in clustered 
mode. The disks that are configured on the existing Win2K 
server are Dynamic disks and from what I understand 
Dynamic disks will not work in W2K3 - is there anything I 
can do to work around this or to revert these disks to 
basic disks before migration or will they work in W2K3 
cluster services ?

Thx in advance
Brendan

3.Windows 2000 Adv to Windows 2003 Ent print Cluster Migration

I am currently migrating our Windows 2000 Advanced print clusters to
Windows 2003 Enterprise and want to automate the printer migrations. I
have tried printmig and it restores the printer drivers but not the
shares and I have tried printbrm but it throws up a lot of error
messages. I have seen several posts regarding this issue but no
definitive solution, can anyone please suggest things to try so I dont
have to manually restore over 100 printers.

Thanks

Chris

4.Error 800706BA with Clustering Service on Windows 2003 Server Enterprise Edition

I try to set up Cluster Service on Windows 2000 Server Enterprise Edition. However, after I set up the first node, when I want to add second node, the problem exist, it show "800706BA AC_ERROR_SERVER_UNAVAILABLE" "Could not connect to the server. Verify that the server exists, that it is part of an Application Center cluster, that it has correct network and DNS settings, and that the credentials supplied have administrative privileges on the server."

But I can not find any infomation on KB about how to solve that? Why that happen? How can I made it work?

5.Upgrading from Exchange 2K Ent edition to Exchange 2K3 Ent edition

Currently I have Exchange 2KEnt and Veritas BU Exec running on the same 
overutilized/under spec'd box.  I am in the process of buying a new server 
and will be installing 2003 server Ent. edition and will be purchasing 
Exhange 2003 Ent edition to install.  I will need to migrate the Exchange 2K 
data over to the 2K3 box. The existing box is also a DHCP Server, DC, 
alternate DNS and a GC.

What is the best migration path to take?

There are three other 2K DCs on the domain as well.  The plan is to upgrade 
those to 2K3 standard.

Your help is greatly appriciated.

6. Windows 2003 Ent SP2 Exchange Cluster Private Network

7. High Availability Cluster using MS Windows Ent Server 2003 + Oracl

8. High Availability Cluster using MS Windows Ent Server 2003 + O