ADMT v3 ERR3:7585 The account replicator is unable to continue.

WINDOWS SERVER

    Sponsored Links

    Next

  • 1. Hardware migration question
    I apologize if this is not the right group to post this message. I have a pentium 4 box with 4GB ram running xp pro. I also have an old 800MHz pentium 3 with 512MB ram running Windows Server 2003. I want to switch boxes and run the 2003 server on the 4GB box and probably turn the xp pro box into a linux machine. My question is, if I just remove the server 2003 hard disk and swap it out with the xp pro hard disk, will it work ok in the faster machine? Besides potential licensing issues will the thing just boot in the new machine with minimal configuration problems? Any input would be appreciated. Tom
  • 2. Creat new domain/move users and computers.
    I currently have a 2003 domain. It was upgraded from NT4.0 then to 2000 and now to 2003 R2. Everything is working okay but I want to start a fresh new domain. I only have about 75 users at the time. I have 2 DCs and 1 Exchange 2003 servers. I also have 2 SQL 2000 (on server 2K) and 1 TS winth Citrix PS4.0 (on server 2K). I would like to build a new 2003 DC and a new Exchange 2003 server and move the users and computers over to the new domain. My question is...What would be the best scenario to accomplish this? I can export the exchange email to .pst files and import on the new server. I could even recreate the user accounts by hand since it's only 75. But since we have around 6 remote offices all over South Carolina, I want to make sure I don't have to go to each workstation and remove and re-join the new domain. Would netdom work for this? Would ADMT v.3 work better? Should I creat the the domain as part of the current forest or create a new forest and trust? Any suggestions would be greatly appreciated. Thanks...
  • 3. Upgrade from SBS2003 SP1 to Win 2003 Standard
    I am apparently missing something here (not that unusual after all) . . . I have a production SBS 2003 Premium SP1 that has been the backbone of a growing business. Unfortunately we have outgrown it and I am working on a migration to a new server set using Win 2003 Enterprise and standard. I started the prelim setup today and have a clean 2003 standard R2 install on a new box connected to the SBS domain. I installed DNS then ran DCPROMO to set up and replicate AD. I get the following error message: "The Active Directory Installation Wizard cannot continue becaues the forest is not perpared for installing Windows Server 2003. Use the Adprep command-line tool to prepare both the forest and the domain. The version of the Active Directory schema of the source forest is not compatible with the version of Active Directory on this computer." Now What? If I run the Adprep tool on my production domain will it create any problems on that domain? I am working on building the new domain off line but I need to replicate AD on line first. Thanks in advance, oldcharlie
  • 4. WIN2K Pro cannot login to domain (In-place upgrade to 2003 R2 from NT4.0)
    Hello, I am in the final testing of the in-place upgrade and yesterday i was struck with a new potential problem which i have not come accross with previous pilot testing. What i did was.. a) Install 1 WIN2K (SP4) & 1 WINXP (SP2) pc and joing to the production NT infra. b) Intall a BDC on the production infra (say - TBDC) c) Intall another BDC on the production infra (say - TBDC1, this is to simulate the actual upgrade process, as we will have 1 BDC serving as a print server for few months after the upgrade). This has DHCP & WINS installed d) Take TBDC off from the production and promote it to PDC. e) Those 2 client PC's will use TBDC1 as the DHCP & WINS server f) Perform in-place upgrade on TBDC which went on smooth. g) Modify the DHCP scope to include the new AD DC's IP for DNS. h) WINXP was able to detect the presence of AD and it joined the AD automatically. i) But WIN2K was not able to join the AD but was able to login using the TBDC1 (BDC), when i tried shutting down the TDBC1, WIN2K was not able to login. The event logs reported... 1)Event ID: 5719 / NETLOGON 2)Event ID: 1000 / Userenv Appreciate if you could let me know what could be causing this issue. Thanks & Rgds, Dinesh
  • 5. Rollback of failed NT domain upgrade
    I am preparing an implementation plan and need help with writing the rollback procedures. If I set aside a BDC and in case of upgrade failure put it back online as PDC that takes care of the server end. However I read somewhere (and naturally now cannot find it) that if any of the client boxes have logged into the upgraded domain and subsequently the decision is made to rollback, there is something that needs to be done to the client so that they will look for the old NT domain again--a config setting or registry key or something that is changed in the client the first time it logs into an Active Directory domain. Can anyone help me with that procedure?

ADMT v3 ERR3:7585 The account replicator is unable to continue.

Postby QW5kcmV3IERvZGQ » Thu, 30 Apr 2009 20:06:02 GMT

Dear All,

I am in the middle of an office migration and I have hit a brick wall and I 
really need all your help...

Source domain NT4
Target domain w2k3r2
The source account is in the target domains Built in Administrators group so 
should have total rights over the target domain.

When running the ADMT wizard it completes but doesn't create the computer 
object. As the account is in the Administrators group I haven't needed to 
delegrate the permissions to the OU.


[Settings Section]
Task: Computer Migration (29)
ADMT Console
    User:       CBEASG\GADMBRYAN
    Computer:   cbegbrasgdc01.c (CBEGBRASGDC01)
        Domain:     cb.winadroot.com (CB)
        OS:         Microsoft Windows Server 2003 R2 5.2 (3790) Service Pack 2
Source Domain
    Name:   CBEASG
    DC:     CBUKHX01
        OS:     Windows NT 4.0 
Target Domain
    Name:   cb.wi.... (CB)
    DC:     cbegbrasgdc01 (CBEGBRASGDC01)
        OS:     Windows Server 2003 5.2 (3790) Service Pack 2
    OU:     LDAP://cb.winadroot.com/OU=Workstations,OU=EMEA-G...
Intra-Forest: No
Translate Option: Add
Translate Files:         Yes
Translate Local Groups:  Yes
Translate Printers:      Yes
Translate Registry:      Yes
Translate Rights:        Yes
Translate Shares:        Yes
Translate User Profiles: Yes
Conflict Option: Ignore
Perform Pre-check Only: No

[Object Migration Section]
2009-04-29 11:18:15 Starting Account Replicator.
2009-04-29 11:18:35 ERR3:7585 The account replicator is unable to continue.  
 Access is denied.
2009-04-29 11:18:35 Operation completed.

[Agent Dispatch Section]


Re: ADMT v3 ERR3:7585 The account replicator is unable to continue.

Postby Meinolf Weber [MVP-DS] » Thu, 30 Apr 2009 20:13:59 GMT

Hello Andrew,

Make sure that the user account you logged on to run ADMT is added into following 
groups:

- Local Administrators group.
- Target Domain Admin group
- Source Domain Admin group

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers 
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!!  http://www.**--****.com/ 





Re: ADMT v3 ERR3:7585 The account replicator is unable to continue.

Postby Meinolf Weber [MVP-DS] » Thu, 30 Apr 2009 20:17:58 GMT

Hello Andrew,

Also make sure you can verify the trust:
 http://www.**--****.com/ 

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers 
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!!  http://www.**--****.com/ 





Similar Threads:

1.ADMT v3 ERR3:7585 The account replicator is unable to continue

2.ADMT v3 ERR2:7697 & ERR2:7585 During Group Acct Migration

3.ADMT v3 error message ERR3:7330 during profile migration

I am migrating from an NT4 domain to a Windows 2003 domain using ADMT v3.  
During the local user profile migration I am getting the message: 

ERR3:7330 Failed to open registry key \Software\Classes, rc=87  The 
parameter is incorrect.

I do not get ERR3:7331 as someone else has reported and the profile is okay 
when the user logs in.    The complete log is posted below.

We are hoping to go into production with this migration in the next couple 
of days and I would like to know how I can correct this error.

Thanks

************  complete log below   ***********
2007-03-09 08:47:42 Active Directory Migration Tool - scripted computer 
migration started.

[Settings Section]
Task: Computer Migration (121)
ADMT Console
    User:       NT\res_migrator
    Computer:   swodcore003.xxxx.ad.yyy.net (SWODCORE003)
        Domain:     xxxx.ad.yyy.net (MEDSTAR)
        OS:         Microsoft Windows Server 2003 R2 5.2 (3790) Service Pack 1
Source Domain
    Name:   NT
    DC:     NTDC01
        OS:     Windows NT 4.0 
Target Domain
    Name:   xxxx.ad.yyy.net (XXXX)
    DC:     swodcore003.xxxx.ad.yyy.net (SWODCORE003)
        OS:     Windows Server 2003 5.2 (3790) Service Pack 1
    OU:     LDAP://swodcore003.xxxx.ad.yyy.net/OU=Computers,OU=OPERATING 
ROOM,OU=lll,DC=xxxx,DC=ad,DC=yyy,DC=net
Intra-Forest: No
Translate Option: Add
Translate Files:         No
Translate Local Groups:  No
Translate Printers:      No
Translate Registry:      No
Translate Rights:        No
Translate Shares:        No
Translate User Profiles: Yes
Conflict Option: Ignore
Perform Pre-check Only: No

[Object Migration Section]
2007-03-09 08:47:42 Starting Account Replicator.
2007-03-09 08:47:58 CN=ORTEST1           - Created
2007-03-09 08:47:58 	- Set password for CN=ORTEST1.
2007-03-09 08:47:58 CN=ORTEST2           - Created
2007-03-09 08:47:58 	- Set password for CN=ORTEST2.
2007-03-09 08:47:58 Operation completed.

[Agent Dispatch Section]
2007-03-09 08:47:59 Read 207 accounts from the database that were previously 
migrated from the domain 'NT' to the domain 'xxxx.ad.yyy.net'.
2007-03-09 08:48:00 Created account input file for remote agents: 
Accounts000121.txt
2007-03-09 08:48:01 Installing agent on 2 servers
		 		
2007-03-09 08:48:01 The Active Directory Migration Tool Agent will be 
installed on ORTEST1
2007-03-09 08:48:01 The Active Directory Migration Tool Agent will be 
installed on ORTEST2
2007-03-09 08:48:04 Started job:  ORTEST1 000121_ORTEST1 
{E5AA4913-33C7-48DF-BC36-ECA2AD4B7C4F}
2007-03-09 08:48:07 Started job:  ORTEST2 000121_ORTEST2 
{103BF0C8-6103-45C0-8373-B9F1510FDE03}
2007-03-09 08:52:31 Done waiting for the computer 'ORTEST2' to reboot.
2007-03-09 08:52:31 Post-check passed on the computer 'ORTEST2'.  The new 
computer name is 'ORTEST2'.
2007-03-09 08:53:01 Done waiting for the computer 'ORTEST1' to reboot.
2007-03-09 08:53:01 Post-check passed on the computer 'ORTEST1'.  The new 
computer name is 'ORTEST1'.
					

[Agent Summary Section]
***** Start of Pre-check Summary *****
Machine Name	Status	Message
ORTEST1     	Passed	
ORTEST2     	Passed	
***** End of Pre-check Summary *****
***** Start of Agent Operation Summary *****
For more information about operations that completed with warnings or 
errors, refer to the Agent Details section.
Machine Name	Status               	Message
ORTEST2     	Successful           	
ORTEST1     	Completed with Errors	
***** End of Agent Operation Summary *****
***** Start of Post-check Summary *****
Machine Name	Status	Message
ORTEST1     	Passed	
ORTEST2     	Passed	
***** End of Post-check Summary *****

[Agent Details Section]

Details for ORTEST1
ocal Machine
    Computer:   ortest1 (ORTEST1)
        Domain:      (NT)
        OS:         Microsoft Windows XP 5.1 (2600) Service Pack 2
2007-03-09 08:48:06 Starting Security Translator.
2007-03-09 08:48:06 Agent is running in local mode.
2007-03-09 08:48:06 Read 207 accounts from 
C:\WINDOWS\OnePointDomainAgent\Accounts000121.txt
2007-03-09 08:48:06 SecurityTranslation Profiles:Yes RecycleBin:Yes 
TranslationMode:Add NT xxxx.ad.yyy.net 
2007-03-09 08:48:06 Starting
2007-03-09 08:48:06 Translating local machine.
2007-03-09 08:48:08 Skipping A:\, rc=21   The device is not ready.
2007-03-09 08:48:08 Processing C:\
2007-03-09 08:48:08 Processing recycle bin files and folders on C:\.
2007-03-09 08:48:08 Examining: S-1-5-21-2564294346-3307217056-2826650621-500
2007-03-09 08:48:08 Examining: S-1-5-21-357464061-3564997506-3233852318-500
2007-03-09 08:48:08 Skipping D:\.  D:\ is a CD-ROM drive.
2007-03-09 08:48:08 Translating user profile, source account='Altiris', 
target account='Altiris'
2007-03-09 08:48:22 Translating user profile, source account='kimyd', target 
account='kimyd'
2007-03-09 08:48:23 ERR3:7330 Failed to open registry key \Software\Classes, 
rc=87  The parameter is incorrect.
2007-03-09 08:48:24 Translating user profile, source account='kielyj', 
target account='kielyj'
2007-03-09 08:48:31 Translating user profile, source account='kimmimi', 
target account='kimmimi'
2007-03-09 08:48:33 Translating user profile, source account='kid1', target 
account='kid1'
2007-03-09 08:48:34 ERR3:7330 Failed to open registry key \Software\Classes, 
rc=87  The parameter is incorrect.
2007-03-09 08:48:35 ------Account Detail---------
2007-03-09 08:48:35 The account detail section uses the following format: 
AccountName(OwnerChanges, GroupChanges, DaclChanges, SaclChanges).
2007-03-09 08:48:35 Altiris (18, 0, 4150, 0) 
2007-03-09 08:48:35 kid1 (35, 0, 1626, 0) 
2007-03-09 08:48:35 kielyj (31, 0, 1621, 0) 
2007-03-09 08:48:35 kimmimi (33, 0, 1621, 0) 
2007-03-09 08:48:35 kimyd (39, 0, 1628, 0) 
2007-03-09 08:48:35 -----------------------------
2007-03-09 08:48:35 60 users, 147 groups
2007-03-09 08:48:35 207 accounts selected.  207 resolved, 0 unresolved.
2007-03-09 08:48:35            Examined        Changed     Unchanged
2007-03-09 08:48:35 Files              0              0             0
2007-03-09 08:48:35 Dirs               0              0             0
2007-03-09 08:48:35 Shares             0              0             0
2007-03-09 08:48:35 Members            0              0             0
2007-03-09 08:48:35 User Rights        0              0             0
2007-03-09 08:48:35 Exchange Objects          0              0             0
2007-03-09 08:48:35 Containers         0              0             0
2007-03-09 08:48:35 DACLs           9308           8539           769
2007-03-09 08:48:35 SACLs              0              0             0
2007-03-09 08:48:35            Examined        Changed     No Target   Not 
Selected     Unknown
2007-03-09 08:48:35 Owners         9308            156          9152         
     0           0
2007-03-09 08:48:35 Groups         9308              0          9308         
     0           0
2007-03-09 08:48:35 DACEs         48558          10646         37912         
 37912           0
2007-03-09 08:48:35 SACEs             0              0             0         
     0           0
2007-03-09 08:48:39 Changed domain affiliation of local computer to 
medstar.ad.medstar.net.
2007-03-09 08:48:39 The local machine will be rebooted in 1 minutes.
2007-03-09 08:48:39 Wrote result file 
C:\WINDOWS\OnePointDomainAgent\000121_ORTEST1.result
2007-03-09 08:48:39 Operation completed.



4.ADMT v3.0 ERR3: 7438 no NTUser.DAT file for "user" was found

I am doing an interforest migration and trying to migrate a user from
domain a (source domain) --> domain b (target domain).  We are
currently housing profiles using DFS (on a Windows Server 2003 R2
server) on a box named File01 which is in domain a.
When ADMT v3 is ran(translate roaming profile option selected) for a
test user we receive an error like the one below in the log.  I am
specifically concerned about is "ERR3: 7438 no NTUser.DAT file for
testuser was found.  The roaming profile cannot be migrated"



[Settings Section]
Task: User Migration (9)
ADMT Console
User: NEWDOMAIN\administrator
Computer: domctl2.newdomain.local (DOMCTL2)
Domain: newdomain.local (NEWDOMAIN)
OS: Microsoft Windows Server 2003 5.2 (3790) Service Pack 2
Source Domain
Name: olddomain (olddomain)
DC: sc-domctl1.olddomain (SC-DOMCTL1)
OS: Windows 2000 Server 5.0 (2195) Service Pack 4
OU:
Target Domain
Name: newdomain.local (NEWDOMAIN)
DC: domctl2.newdomain.local (DOMCTL2)
OS: Windows Server 2003 5.2 (3790) Service Pack 2
OU: LDAP://newdomain.local/OU=newdomainUsers,DC=newdomain,DC=local
Intra-Forest: No
Password Option: Generate passwords, only for new objects = Yes
Password File: 'C:\WINDOWS\ADMT\Logs\passwords.txt'
Migrate Security Identifiers: No
Update Rights: Yes
Translate Roaming Profiles: Yes
Fix group membership: Yes
Conflict Option: Ignore
Source Disable Option: Leave source account
Source Expiration: Do not expire source account
Target Disable Option: Enable target account
Migrate groups: No
Migrate service accounts: Yes

[Object Migration Section]
2007-05-24 10:45:17 Starting Account Replicator.
2007-05-24 10:45:18 CN=Test User - Created
2007-05-24 10:45:18 CN=Test User - Strong password generated.
2007-05-24 10:45:18 WRN1:7874 Disabled the "password never expires"
account option for account 'CN=Test User'.
2007-05-24 10:45:18 ERR3:7438 No NTUser.DAT file for testuser was
found in \\newdomain.local\C$\DFSRoots\User\Profile\testuser. The
roaming profile cannot be migrated.
2007-05-24 10:45:18 Updated user rights for CN=Test User
2007-05-24 10:45:18 Operation completed.

5.ADMT Error 7585: Access Denied when migrating users with group

6. ADMT Error 7585: Access Denied when migrating users with groups

7. Importing existing ADMT v3 database to another ADMT v3 server

8. ADMT v3 Automatically disables migrated account



Return to WINDOWS SERVER

 

Who is online

Users browsing this forum: No registered users and 57 guest